Add README.md
[pdp8.git] / sw / kermit / k12 / k12ip1.odt
1 This is an example of an ODT session to manually enter the IPL1.SV program
2 followed by an explicit SAVE command. This is identical to loading the
3 binary produced by IPL1.PA, a customized version of K12IPL.PAL. Locations
4 marked with * are modified according to the REC parameter; locations marked
5 with ** are modified according to the SEN parameter; locations marked with
6 *** are modified according to the BRATE parameter. All values in this
7 example are obtained using default parameters. All commands are normally
8 terminated with CR except within ODT. In ODT all commands are terminated
9 with LF to automatically advance to the next location, except the final
10 numeric command which terminates with CR to end the loading. The xxxx
11 indicates the former contents which are to be ignored. Exit from ODT is
12 via ^C.
13
14 .ODT
15
16 00200/xxxx 6032
17 00201 /xxxx 1236
18 00202 /xxxx 6413 **
19 00203 /xxxx 6031
20 00204 /xxxx 5203
21 00205 /xxxx 6036
22 00206 /xxxx 6416 **
23 00207 /xxxx 6046
24 00210 /xxxx 6406 *
25 00211 /xxxx 6211
26 00212 /xxxx 4236
27 00213 /xxxx 5212
28 00214 /xxxx 5217
29 00215 /xxxx 4236
30 00216 /xxxx 5232
31 00217 /xxxx 7106
32 00220 /xxxx 7006
33 00221 /xxxx 7006
34 00222 /xxxx 3635
35 00223 /xxxx 4236
36 00224 /xxxx 5232
37 00225 /xxxx 1635
38 00226 /xxxx 3635
39 00227 /xxxx 2235
40 00230 /xxxx 0177
41 00231 /xxxx 5215
42 00232 /xxxx 7600
43 00233 /xxxx 6203
44 00234 /xxxx 5632
45 00235 /xxxx 0000
46 00236 /xxxx 0007 ***
47 00237 /xxxx 6401 *
48 00240 /xxxx 5237
49 00241 /xxxx 6406 *
50 00242 /xxxx 0230
51 00243 /xxxx 1256
52 00244 /xxxx 7510
53 00245 /xxxx 5237
54 00246 /xxxx 1255
55 00247 /xxxx 7500
56 00250 /xxxx 5636
57 00251 /xxxx 0254
58 00252 /xxxx 2236
59 00253 /xxxx 5636
60 00254 /xxxx 0077
61 00255 /xxxx 7700
62 00256 /xxxx 7737
63 ^C
64
65 .SAVE SYS IPL1
66
67 IPL1.SV is now ready to run as documented in K12IPL.PAL.