X-Git-Url: http://gitweb.hachti.de/?a=blobdiff_plain;f=sw%2Fdumprest%2Foriginal%2Fcomm.c;fp=sw%2Fdumprest%2Foriginal%2Fcomm.c;h=b17aa50d1cbb87a1fd8ca4683488278cd874383d;hb=81e70d488b71bf995c459ca3a02c025993460ffa;hp=0000000000000000000000000000000000000000;hpb=07ec0278333ed187ac242dedcff13c56cf1b0b91;p=pdp8.git

diff --git a/sw/dumprest/original/comm.c b/sw/dumprest/original/comm.c
new file mode 100644
index 0000000..b17aa50
--- /dev/null
+++ b/sw/dumprest/original/comm.c
@@ -0,0 +1,216 @@
+
+#ifdef PC
+PORT port_handle;
+
+
+void (interrupt EN_FAR *(old_vect23))(void);
+void (interrupt EN_FAR *(old_vect1b))(void);
+
+/* Trap break etc to allow program to terminate  on PC */
+void interrupt EN_FAR en_ctrl_brk()
+{
+   terminate = 1;
+}
+void interrupt EN_FAR en_ctrl_c() {
+   terminate =  1;
+}
+
+int ser_read(int fd,char *buf,int bufsize)
+{
+   int bufcnt = 0;
+   int t;
+
+   t = com_getc(&port_handle);
+   while (t != -1 && bufcnt < bufsize) {
+      *(buf++) = t;
+      t = com_getc(&port_handle);
+      bufcnt++;
+   }
+   return bufcnt;
+}
+
+int ser_write(int fd,char *buf,int bufsize)
+{
+   int bufcnt = bufsize;
+
+   while (bufsize-- > 0) {
+      while (com_putc(*buf,&port_handle) != 0);
+      buf++;
+   }
+   return bufcnt;
+}
+
+void cleanup(void)
+{
+   while (!terminate && port_handle.tx_cnt != 0)
+      ;
+   if (terminate)
+      com_clear_que(RX | TX, &port_handle);
+   suspend(50);
+   printf("Parity err %d framing err %d overrun err %d dropped %d\n",
+      port_handle.parity_errs,port_handle.framing_errs,
+      port_handle.overrun_errs,port_handle.rx_overflow);
+   com_port_destroy(&port_handle);
+   end_clock();
+   setvect(0x23, old_vect23);                    /* restore ^C, ^Break     */
+   setvect(0x1b, old_vect1b);
+}
+
+int init_comm(char *cport,long baud,int two_stop)
+{
+    printf("Port: %s, Baud rate: %i\n", port, baud);
+   int port;
+   int base,irq;
+
+   if (sscanf(cport,"%x,%x",&base,&irq) == 2) {
+      port = COM1;
+      com_config(COM1,base,irq);
+   } else {
+      if (strlen(cport) != 4 || strnicmp(cport,"COM",3) != 0 ||
+            (cport[3] > '4' || cport[3] < '1')) {
+         printf("Illegal port %s, must be com1 to com4\n",cport);
+         exit(1);
+      }
+      switch(cport[3])
+      {
+        case '1': port = COM1; break;
+        case '2': port = COM2; break;
+        case '3': port = COM3; break;
+        case '4': port = COM4; break;
+        default:
+           printf("Illegal port %s, must be com1 to com4\n",cport);
+           exit(1);
+      }
+   }
+   if( com_port_create(port, baud,'N',8,1 + two_stop, 4096, 4096,
+      &port_handle) < 0 )
+   {
+     printf("Cannot create COM port");
+     exit(1);
+   }
+
+   init_clock(0x3333);
+
+   /*--------- take over 0x23 and 0x1B to suppress CTRL-C and Break ---------*/
+   old_vect23 = getvect(0x23);
+   old_vect1b = getvect(0x1b);
+   setvect(0x23, en_ctrl_c);
+   setvect(0x1b, en_ctrl_brk);
+   atexit(cleanup);
+
+   com_clear_que(RX | TX, &port_handle);
+
+   if (port_handle.uart_type == ID_16550) {
+      fifo_enable(&port_handle);
+      com_fifo_trigger(RX_TRIG_4,&port_handle);
+   }
+
+   return 0;
+}
+
+
+int getchar_nonblock(void) {
+   if (kbhit()) {
+      return getch();
+   } else{
+      return 0;
+   }
+}
+
+#else
+
+#define ser_read(a,b,c) read(a,b,c)
+#define ser_write(a,b,c) write(a,b,c)
+
+#ifdef _STDC_
+int init_comm(char *, long, int);
+#endif
+
+int init_comm(port,baud,two_stop)
+   char *port;
+   long baud;
+   int two_stop;
+
+{
+    printf("Port: %s, Baud rate: %i\n", port, baud);
+
+   struct termios tios;              /* Serial port TERMIO structure */
+   int port_fd;
+
+   port_fd = open(port,O_RDWR,0);
+   if (port_fd < 0) {
+      fprintf (stderr,"init_comm: Open failed on port '%s': ",port);
+      perror("");
+      exit(1);
+   }
+
+      /* Set to 8 bit selected baud no parity with no special processing */
+   if (tcgetattr(port_fd,&tios) < 0) {
+      perror("init_comm: tcgetattr failed");
+      exit(1);
+   }
+   tios.c_cflag = CS8 | CREAD | HUPCL | CLOCAL | baud;
+   if (two_stop)
+      tios.c_cflag |= CSTOPB;
+   tios.c_iflag = 0;
+   tios.c_lflag = 0;
+   tios.c_oflag = 0;
+   tios.c_cc[VMIN] = 0;
+   tios.c_cc[VTIME] = 1;
+
+   if (cfsetispeed(&tios,baud) != 0)
+      printf("init_comm: set ispeed failed\n");
+   if (cfsetospeed(&tios,baud) != 0)
+      printf("init_comm: set ospeed failed\n");
+
+   if (tcsetattr(port_fd,TCSANOW,&tios) < 0) {
+      perror("init_comm: tcsetattr failed");
+      exit(1);
+   }
+   tcflush(port_fd,TCIOFLUSH);
+   return(port_fd);
+}
+
+struct termios orig_tios;              /* Serial port TERMIO structure */
+
+void restore_termio() {
+   if (tcsetattr(STDIN_FILENO,TCSANOW,&orig_tios) < 0) {
+      perror("restore_termio: tcsetattr failed");
+      exit(1);
+   }
+   printf("Terminal settings restored\n");
+
+   exit(0);
+}
+
+void set_input_nonblock() {
+   struct termios tios;              /* Serial port TERMIO structure */
+
+   signal(SIGINT, restore_termio);
+   if (tcgetattr(STDIN_FILENO,&orig_tios) < 0) {
+      perror("set_input_nonblock: tcgetattr failed");
+      exit(1);
+   }
+   if (tcgetattr(STDIN_FILENO,&tios) < 0) {
+      perror("tcgetattr failed");
+      exit(1);
+   }
+   tios.c_cc[VMIN] = 0;
+   tios.c_cc[VTIME] = 0;
+   tios.c_lflag &= ~(ICANON | ECHO);
+   if (tcsetattr(STDIN_FILENO,TCSANOW,&tios) < 0) {
+      perror("set_input_nonblock: tcsetattr failed");
+      exit(1);
+   }
+}
+
+int getchar_nonblock(void) {
+   static int init = 0;
+   if (!init) {
+      set_input_nonblock();
+      init = 1;
+   }
+
+   return getchar();
+}
+#endif