| 1 | /* sim_rev.h: simulator revisions and current rev level\r |
| 2 | \r |
| 3 | Copyright (c) 1993-2007, Robert M Supnik\r |
| 4 | \r |
| 5 | Permission is hereby granted, free of charge, to any person obtaining a\r |
| 6 | copy of this software and associated documentation files (the "Software"),\r |
| 7 | to deal in the Software without restriction, including without limitation\r |
| 8 | the rights to use, copy, modify, merge, publish, distribute, sublicense,\r |
| 9 | and/or sell copies of the Software, and to permit persons to whom the\r |
| 10 | Software is furnished to do so, subject to the following conditions:\r |
| 11 | \r |
| 12 | The above copyright notice and this permission notice shall be included in\r |
| 13 | all copies or substantial portions of the Software.\r |
| 14 | \r |
| 15 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\r |
| 16 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\r |
| 17 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL\r |
| 18 | ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER\r |
| 19 | IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN\r |
| 20 | CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r |
| 21 | \r |
| 22 | Except as contained in this notice, the name of Robert M Supnik shall not be\r |
| 23 | used in advertising or otherwise to promote the sale, use or other dealings\r |
| 24 | in this Software without prior written authorization from Robert M Supnik.\r |
| 25 | */\r |
| 26 | \r |
| 27 | #ifndef _SIM_REV_H_\r |
| 28 | #define _SIM_REV_H_ 0\r |
| 29 | \r |
| 30 | #define SIM_MAJOR 3\r |
| 31 | #define SIM_MINOR 8\r |
| 32 | #define SIM_PATCH 0\r |
| 33 | #define SIM_DELTA 0\r |
| 34 | \r |
| 35 | /* V3.8 revision history\r |
| 36 | \r |
| 37 | patch date module(s) and fix(es)\r |
| 38 | \r |
| 39 | 0 tbd scp.c:\r |
| 40 | - fixed bug in local/global register search (found by Mark Pizzolato)\r |
| 41 | - fixed bug in restore of RO units (from Mark Pizzolato)\r |
| 42 | - added SET/SHO/NO BR with default argument (from Dave Bryan)\r |
| 43 | \r |
| 44 | sim_tmxr.c\r |
| 45 | - worked around Telnet negotiation problem with QCTerm (from Dave Bryan)\r |
| 46 | \r |
| 47 | gri_defs.h, gri_cpu.c, gri_sys.c:\r |
| 48 | - added GRI-99 support\r |
| 49 | \r |
| 50 | hp2100_baci.c (from Dave Bryan):\r |
| 51 | - Implemented 12966A Buffered Asynchronous Communications Interface simulator\r |
| 52 | \r |
| 53 | hp2100_cpu.c (from Dave Bryan):\r |
| 54 | - Memory ex/dep and bkpt type default to current map mode\r |
| 55 | - Added SET CPU DEBUG and OS/VMA flags, enabled OS/VMA\r |
| 56 | - Corrected MP W5 (JSB) jumper action, SET/SHOW reversal,\r |
| 57 | mp_mevff clear on interrupt with I/O instruction in trap cell\r |
| 58 | - Removed DBI support from 1000-M (was temporary for RTE-6/VM)\r |
| 59 | - Enabled EMA and VIS, added EMA, VIS, and SIGNAL debug flags\r |
| 60 | - Enabled SIGNAL instructions, SIG debug flag\r |
| 61 | - Fixed single stepping through interrupts\r |
| 62 | \r |
| 63 | hp2100_cpu0.c (from Dave Bryan and Holger Veit):\r |
| 64 | - Removed and implemented "cpu_rte_vma" and "cpu_rte_os"\r |
| 65 | - Removed and implemented "cpu_vis" and "cpu_signal"\r |
| 66 | - Removed and implemented "cpu_rte_ema"\r |
| 67 | \r |
| 68 | hp2100_cpu1.c (from Dave Bryan):\r |
| 69 | - Added fprint_ops, fprint_regs for debug printouts\r |
| 70 | - Enabled DIAG as NOP on 1000 F-Series\r |
| 71 | - Fixed VIS and SIGNAL to depend on the FPP and HAVE_INT64\r |
| 72 | \r |
| 73 | hp2100_cpu3.c (from Dave Bryan):\r |
| 74 | - Fixed unsigned divide bug in .DDI\r |
| 75 | - Fixed unsigned multiply bug in .DMP\r |
| 76 | - Added implementation of DBI self-test\r |
| 77 | \r |
| 78 | hp2100_cpu4.c (from Dave Bryan):\r |
| 79 | - Fixed B register return bug in /CMRT\r |
| 80 | \r |
| 81 | hp2100_cpu5.c (from Holger Veit):\r |
| 82 | - Implemented RTE-6/VM Virtual Memory Area firmware\r |
| 83 | - Implemented RTE-IV Extended Memory Area firmware\r |
| 84 | \r |
| 85 | hp2100_cpu6.c (from Dave Bryan):\r |
| 86 | - Implemented RTE-6/VM OS accelerator firmware\r |
| 87 | \r |
| 88 | hp2100_cpu7.c (from Holger Veit):\r |
| 89 | - Implemented Vector Instruction Set and SIGNAL/1000 firmware\r |
| 90 | \r |
| 91 | hp2100_ds.c (from Dave Bryan):\r |
| 92 | - Corrected and verified ioCRS action\r |
| 93 | - Corrected DPTR register definition from FLDATA to DRDATA\r |
| 94 | \r |
| 95 | hp2100_fp.c (from Mark Pizzolato)\r |
| 96 | - Corrected fp_unpack mantissa high-word return\r |
| 97 | \r |
| 98 | hp2100_fp1.c (from Dave Bryan):\r |
| 99 | - Reworked "complement" to avoid inlining bug in gcc-4.x\r |
| 100 | - Fixed uninitialized return in fp_accum when setting\r |
| 101 | \r |
| 102 | hp2100_mux.c (from Dave Bryan):\r |
| 103 | - Sync mux poll with console poll for idle compatibility\r |
| 104 | \r |
| 105 | hp2100_stddev.c (from Dave Bryan):\r |
| 106 | - Fixed PTR trailing null counter for tape re-read\r |
| 107 | - Added IPTICK register to CLK to display CPU instr/tick\r |
| 108 | - Corrected and verified ioCRS actions\r |
| 109 | - Changed TTY console poll to 10 msec. real time\r |
| 110 | - Synchronized CLK with TTY if set for 10 msec.\r |
| 111 | - Added UNIT_IDLE to TTY and CLK\r |
| 112 | - Removed redundant control char handling definitions\r |
| 113 | - Changed TTY output wait from 100 to 200 for MSU BASIC\r |
| 114 | \r |
| 115 | hp2100_sys.c (from Dave Bryan):\r |
| 116 | - Added BACI device\r |
| 117 | - Added RTE OS/VMA/EMA mnemonics\r |
| 118 | - Changed fprint_sym to handle step with irq pending\r |
| 119 | \r |
| 120 | hp2100_cpu.h (from Dave Bryan):\r |
| 121 | - Added calc_defer() prototype\r |
| 122 | - Added extern sim_deb, cpu_dev, DEB flags for debug printouts\r |
| 123 | - Added extern intaddr, mp_viol, mp_mevff, calc_int, dev_ctl,\r |
| 124 | ReadIO, WriteIO for RTE-6/VM microcode support\r |
| 125 | \r |
| 126 | hp2100_cpu1.h (from Dave Bryan):\r |
| 127 | - Corrected OP_AFF to OP_AAFF for SIGNAL/1000\r |
| 128 | - Removed unused operand patterns\r |
| 129 | - Added fprint_ops, fprint_regs for debug printouts\r |
| 130 | - Revised OP_KKKAKK operand profile to OP_CCCACC for $LOC\r |
| 131 | \r |
| 132 | hp2100_defs.h (from Dave Bryan):\r |
| 133 | - Added BACI device\r |
| 134 | - Added 16/32-bit unsigned-to-signed conversions\r |
| 135 | - Changed TMR_MUX to TMR_POLL for idle support\r |
| 136 | - Added POLLMODE, sync_poll() declaration\r |
| 137 | - Added I_MRG, I_ISZ, I_IOG, I_STF, and I_SFS instruction masks\r |
| 138 | - Added I_MRG_I, I_JSB, I_JSB_I, and I_JMP instruction masks\r |
| 139 | \r |
| 140 | nova_defs.h (from Bruce Ray):\r |
| 141 | - added support for third-party 64KW memory\r |
| 142 | \r |
| 143 | nova_clk.c (from Bruce Ray):\r |
| 144 | - renamed to RTC, to match DG literature\r |
| 145 | \r |
| 146 | nova_cpu.c (from Bruce Ray):\r |
| 147 | - added support for third-party 64KW memory\r |
| 148 | - added Nova 3 "secret" instructions\r |
| 149 | - added CPU history support\r |
| 150 | \r |
| 151 | nova_dkp.c (from Bruce Ray):\r |
| 152 | - renamed to DKP, to match DG literature\r |
| 153 | - fixed numerous bugs in both documented and undocumented behavior\r |
| 154 | - changed bootstrap code to DG official sequence\r |
| 155 | \r |
| 156 | nova_dsk.c (from Bruce Ray):\r |
| 157 | - renamed to DSK, to match DG literature\r |
| 158 | - added support for undocumented behavior\r |
| 159 | - changed bootstrap code to DG official sequence\r |
| 160 | \r |
| 161 | nova_mta.c (from Bruce Ray):\r |
| 162 | - renamed to MTA, to match DG literature\r |
| 163 | - changed bootstrap code to DG official sequence\r |
| 164 | \r |
| 165 | nova_plt.c, nova_pt.c (from Bruce Ray):\r |
| 166 | - added 7B/8B support\r |
| 167 | \r |
| 168 | nova_sys.c (from Bruce Ray):\r |
| 169 | - fixed mistaken instruction mnemonics\r |
| 170 | \r |
| 171 | pdp11_cpu.c, pdp11_io.c, pdp11_rh.c:\r |
| 172 | - fixed DMA memory address limit test (found by John Dundas)\r |
| 173 | - fixed MMR0 treatment in RESET (found by Walter Mueller)\r |
| 174 | \r |
| 175 | pdp11_cpumod.h, pdp11_cpumod.c:\r |
| 176 | - fixed write behavior of 11/70 MBRK, LOSIZE, HISIZE (found by Walter Mueller)\r |
| 177 | - added support to set default state of KDJ11B,E clock control register\r |
| 178 | \r |
| 179 | pdp11_dc.c:\r |
| 180 | - added support for DC11\r |
| 181 | \r |
| 182 | pdp11_defs.h:\r |
| 183 | - added KE, KG, RC, DC support\r |
| 184 | - renamed DL11 devices\r |
| 185 | \r |
| 186 | pdp11_dl.c:\r |
| 187 | - renamed devices to DLI/DLO, to match DC11\r |
| 188 | - added modem control\r |
| 189 | \r |
| 190 | pdp11_io.c:\r |
| 191 | - added autoconfigure support for DC11\r |
| 192 | \r |
| 193 | pdp11_ke.c:\r |
| 194 | - added support for KE11A\r |
| 195 | \r |
| 196 | pdp11_kg.c (from John Dundas):\r |
| 197 | - added support for KG11A\r |
| 198 | \r |
| 199 | pdp11_rc.c (from John Dundas):\r |
| 200 | - added support for RC11\r |
| 201 | \r |
| 202 | pdp11_sys.c:\r |
| 203 | - modified to allow -A, -B use with 8b devices\r |
| 204 | - added KE, KG, RC, DC support\r |
| 205 | - renamed DL11 devices\r |
| 206 | \r |
| 207 | vax_cmode.c, vax_io.c, vax780_uba.c:\r |
| 208 | - fixed declarations (from Mark Pizzolato)\r |
| 209 | \r |
| 210 | \r |
| 211 | /* V3.7 revision history \r |
| 212 | \r |
| 213 | 3 02-Sep-07 scp.c:\r |
| 214 | - fixed bug in SET THROTTLE command\r |
| 215 | \r |
| 216 | pdp10_cpu.c:\r |
| 217 | - fixed non-portable usage in SHOW HISTORY routine\r |
| 218 | \r |
| 219 | pdp11_ta.c:\r |
| 220 | - forward op at BOT skips initial file gap\r |
| 221 | \r |
| 222 | pdp8_ct.c:\r |
| 223 | - forward op at BOT skips initial file gap\r |
| 224 | - fixed handling of BEOT\r |
| 225 | \r |
| 226 | vax_cpu.c:\r |
| 227 | - fixed bug in read access g-format indexed specifiers\r |
| 228 | \r |
| 229 | 2 12-Jul-07 sim_ether.c (from Dave Hittner):\r |
| 230 | - fixed non-ethernet device removal loop (from Naoki Hamada)\r |
| 231 | - added dynamic loading of wpcap.dll;\r |
| 232 | - corrected exceed max index bug in ethX lookup\r |
| 233 | - corrected failure to look up ethernet device names in\r |
| 234 | the registry on Windows XP x64\r |
| 235 | \r |
| 236 | sim_timer.c:\r |
| 237 | - fixed idle timer event selection algorithm\r |
| 238 | \r |
| 239 | h316_lp.c:\r |
| 240 | - fixed loss of last print line (from Theo Engel)\r |
| 241 | \r |
| 242 | h316_mt.c:\r |
| 243 | - fixed bug in write without stop (from Theo Engel)\r |
| 244 | \r |
| 245 | h316_stddev.c:\r |
| 246 | - fixed bug in clock increment (from Theo Engel)\r |
| 247 | \r |
| 248 | i1401_cpu.c:\r |
| 249 | - added recognition of overlapped operation modifiers\r |
| 250 | - remove restriction on load-mode binary tape operations\r |
| 251 | \r |
| 252 | i1401_mt.c:\r |
| 253 | - fixed read tape mark operation (found by Van Snyder)\r |
| 254 | - remove restriction on load-mode binary tape operations\r |
| 255 | \r |
| 256 | pdp1_cpu.c:\r |
| 257 | - fixed typo in SBS clear (from Norm Lastovica)\r |
| 258 | \r |
| 259 | pdp11_rh.c, pdp11_rp.c, pdp11_tu.c:\r |
| 260 | - CS1 DVA is in the device, not the MBA\r |
| 261 | \r |
| 262 | pdp8_ct.c:\r |
| 263 | - fixed typo (from Norm Lastovica)\r |
| 264 | \r |
| 265 | vax_cpu.c:\r |
| 266 | - revised idle detector\r |
| 267 | \r |
| 268 | 1 14-May-07 scp.c:\r |
| 269 | - modified sim_instr invocation to call sim_rtcn_init_all\r |
| 270 | - fixed bug in get_sim_opt (reported by Don North)\r |
| 271 | - fixed bug in RESTORE with changed memory size\r |
| 272 | - added global 'RESTORE in progress' flag\r |
| 273 | - fixed breakpoint actions in DO command file processing\r |
| 274 | (from Dave Bryan)\r |
| 275 | \r |
| 276 | all CPU's with clocks:\r |
| 277 | - removed clock initialization (now done in SCP)\r |
| 278 | \r |
| 279 | hp2100_cpu.c (from Dave Bryan):\r |
| 280 | - EDT passes input flag and DMA channel in dat parameter\r |
| 281 | \r |
| 282 | hp2100_ipl.c (from Dave Bryan):\r |
| 283 | - IPLI EDT delays DMA completion interrupt for TSB\r |
| 284 | \r |
| 285 | hp2100_mux.c (from Dave Bryan):\r |
| 286 | - corrected "mux_sta" size from 16 to 21 elements\r |
| 287 | - fixed "muxc_reset" to clear lines 16-20\r |
| 288 | - fixed control card OTx to set current channel number\r |
| 289 | - fixed to set "muxl_ibuf" in response to a transmit interrupt\r |
| 290 | - changed "mux_xbuf", "mux_rbuf" declarations from 8 to 16 bits\r |
| 291 | - fixed to set "mux_rchp" when a line break is received\r |
| 292 | - fixed incorrect "odd_par" table values\r |
| 293 | - reversed test in "RCV_PAR" to return "LIL_PAR" on odd parity\r |
| 294 | - rixed mux reset (ioCRS) to clear port parameters\r |
| 295 | - fixed to use PUT_DCH instead of PUT_CCH for data channel status\r |
| 296 | - added DIAG/TERM modifiers to implement diagnostic mode\r |
| 297 | \r |
| 298 | pdp11_cpumod.c:\r |
| 299 | - changed memory size routine to work with RESTORE\r |
| 300 | \r |
| 301 | pdp11_hk.c:\r |
| 302 | - NOP and DCLR (at least) do not check drive type\r |
| 303 | - MR2 and MR3 only updated on NOP\r |
| 304 | \r |
| 305 | pdp10_tu.c, pdp11_tu.c:\r |
| 306 | - TMK sets FCE only on read (found by Naoki Hamada)\r |
| 307 | \r |
| 308 | pdp11_xu.c:\r |
| 309 | - added missing FC_RMAL command\r |
| 310 | - cleared multicast on write\r |
| 311 | \r |
| 312 | vax_moddefs.h, vax_cpu1.c:\r |
| 313 | - separated PxBR and SBR mbz checks\r |
| 314 | \r |
| 315 | vax780_defs.h\r |
| 316 | - separated PxBR and SBR mbz checks\r |
| 317 | - modified mbz checks to reflect 780 microcode patches\r |
| 318 | (found by Naoki Hamada)\r |
| 319 | \r |
| 320 | vax_mmu.c:\r |
| 321 | - added address masking to all SBR-based memory reads\r |
| 322 | \r |
| 323 | 0 30-Jan-07 scp.c:\r |
| 324 | - implemented throttle commands\r |
| 325 | - added -e to control error processing in DO command files\r |
| 326 | (from Dave Bryan)\r |
| 327 | \r |
| 328 | sim_console.c:\r |
| 329 | - fixed handling of non-printable characters in KSR mode\r |
| 330 | \r |
| 331 | sim_tape.c:\r |
| 332 | - fixed bug in reverse operations for P7B-format tapes\r |
| 333 | - fixed bug in reverse operations across erase gaps\r |
| 334 | \r |
| 335 | sim_timer.c:\r |
| 336 | - added throttle support\r |
| 337 | - added idle support (based on work by Mark Pizzolato)\r |
| 338 | \r |
| 339 | gri_stddev.c, h316_stddev.c, pdp18b_tt1.c\r |
| 340 | - fixed handling of non-printable characters in KSR mode\r |
| 341 | \r |
| 342 | hp2100_cpu.c, hp2100_cpu0.c, hp2100_cpu1.c, hp2100_cpu2.c,\r |
| 343 | hp2100_cpu3.c, hp2100_cpu4.c (from Dave Bryan):\r |
| 344 | - reorganized CPU modules for easier addition of new instructions\r |
| 345 | - added Double Integer instructions, 1000-F CPU, 2114 and\r |
| 346 | 2115 CPUs, 12K and 24K memory sizes, 12607B and 12578A DMA\r |
| 347 | controllers, and 21xx binary loader protection\r |
| 348 | - fixed DMS self-test instruction execution on 1000-M\r |
| 349 | - fixed indirect interrupt holdoff logic\r |
| 350 | \r |
| 351 | hp2100_ds.c:\r |
| 352 | - fixed REQUEST STATUS to clear status-1 (from Dave Bryan)\r |
| 353 | \r |
| 354 | hp2100_fp1.c:\r |
| 355 | - Added Floating Point Processor (from Dave Bryan)\r |
| 356 | \r |
| 357 | hp2100_lps.c:\r |
| 358 | - fixed diag-mode CLC response\r |
| 359 | \r |
| 360 | i7094_cpu.c:\r |
| 361 | - fixed new bug in halt IO wait loop\r |
| 362 | - added IFT, EFT expanded core test instructions\r |
| 363 | \r |
| 364 | id16_cpu.c, id32_cpu.c:\r |
| 365 | - removed separate multiplexor clock\r |
| 366 | - added idle support\r |
| 367 | \r |
| 368 | id_pas.c:\r |
| 369 | - synced multiplexor poll to real-time clock\r |
| 370 | \r |
| 371 | id_tt.c, id_ttp.c:\r |
| 372 | - fixed handling of non-printable characters in KSR mode\r |
| 373 | - synced keyboard poll to real-time clock\r |
| 374 | \r |
| 375 | id_uvc.c:\r |
| 376 | - changed line-time clock to be free-running\r |
| 377 | \r |
| 378 | pdp1_cpu.c:\r |
| 379 | - added 16-channel sequence break system (API) support\r |
| 380 | - added PDP-1D support\r |
| 381 | \r |
| 382 | pdp1_clk.c:\r |
| 383 | - first release\r |
| 384 | \r |
| 385 | pdp1_dcs.c:\r |
| 386 | - first release\r |
| 387 | \r |
| 388 | pdp1_stddev.c:\r |
| 389 | - separated TTI, TTO for API support\r |
| 390 | \r |
| 391 | pdp1_sys.c:\r |
| 392 | - added PDP-1D, 16-channel SBS, clock, DCS support\r |
| 393 | - fixed bugs in character input, block loader\r |
| 394 | \r |
| 395 | pdp10_cpu.c:\r |
| 396 | - added idle support\r |
| 397 | \r |
| 398 | pdp10_defs.h, pdp10_sys.c:\r |
| 399 | - added CR support\r |
| 400 | \r |
| 401 | pdp10_fe.c, pdp10_tim.c:\r |
| 402 | - synced keyboard poll to real-time clock\r |
| 403 | \r |
| 404 | pdp11_cr.c:\r |
| 405 | - revised for PDP-10 compatibility (CD11 only)\r |
| 406 | \r |
| 407 | pdp11_cpu.c:\r |
| 408 | - added idle support\r |
| 409 | - fixed bug in ASH -32 C value\r |
| 410 | \r |
| 411 | pdp11_rf.c:\r |
| 412 | - fixed unit mask (found by John Dundas)\r |
| 413 | \r |
| 414 | pdp11_stddev.c, vax_stddev.c, vax780_stddev.c:\r |
| 415 | - synced keyboard poll to real-time clock\r |
| 416 | - added clock coscheduling support\r |
| 417 | \r |
| 418 | pdp11_ta.c:\r |
| 419 | - first release\r |
| 420 | \r |
| 421 | pdp11_vh.c:\r |
| 422 | - synced service poll to real-time clock\r |
| 423 | - changed device to be off by default\r |
| 424 | \r |
| 425 | pdp11_dz.c, pdp11_xq.c, pdp11_xu.c:\r |
| 426 | - synced service poll to real-time clock\r |
| 427 | \r |
| 428 | pdp11_sys.c:\r |
| 429 | - fixed operand order in EIS instructions (found by W.F.J. Mueller)\r |
| 430 | - added TA11 support\r |
| 431 | \r |
| 432 | pdp18b_cpu.c:\r |
| 433 | - fixed incorrect value of PC on instruction fetch mem mmgt error\r |
| 434 | - fixed PDP-15 handling of mem mmgt traps (sets API 3)\r |
| 435 | - fixed PDP-15 handling of CAL API 4 (sets only if 0-3 inactive)\r |
| 436 | - fixed PDP-15 CAF to clear memory management mode register\r |
| 437 | - fixed boundary test in KT15/XVM (reported by Andrew Warkentin)\r |
| 438 | - added XVM RDCLK instruction\r |
| 439 | - added idle support and infinite loop detection\r |
| 440 | \r |
| 441 | pdp18b_rf.c:\r |
| 442 | - fixed bug, DSCD does not clear function register\r |
| 443 | \r |
| 444 | pdp18b_stddev.c:\r |
| 445 | - added PDP-15 program-selectable duplex handling instruction\r |
| 446 | - fixed PDP-15 handling of reader out-of-tape\r |
| 447 | - fixed handling of non-printable characters in KSR mode\r |
| 448 | - added XVM RDCLK instruction\r |
| 449 | - changed real-time clock to be free running\r |
| 450 | - synced keyboard poll to real-time clock\r |
| 451 | \r |
| 452 | pdp18b_tt1.c\r |
| 453 | - fixed handling of non-printable characters in KSR mode\r |
| 454 | \r |
| 455 | pdp18b_sys.c:\r |
| 456 | - added XVM RDCLK instruction\r |
| 457 | \r |
| 458 | pdp8_cpu.c:\r |
| 459 | - fixed SC value after DVI overflow (found by Don North)\r |
| 460 | - added idle support and infinite loop detection\r |
| 461 | \r |
| 462 | pdp8_ct.c:\r |
| 463 | - first release\r |
| 464 | \r |
| 465 | pdp8_clk.c:\r |
| 466 | - changed real-time clock to be free running\r |
| 467 | \r |
| 468 | pdp8_sys.c:\r |
| 469 | - added TA8E support\r |
| 470 | - added ability to disambiguate overlapping IOT definitions\r |
| 471 | \r |
| 472 | pdp8_tt.c:\r |
| 473 | - fixed handling of non-printable characters in KSR mode\r |
| 474 | - synced keyboard poll to real-time clock\r |
| 475 | \r |
| 476 | vax_cpu.c, vax_cpu1.c:\r |
| 477 | - added idle support\r |
| 478 | \r |
| 479 | vax_syscm.c:\r |
| 480 | - fixed operand order in EIS instructions (found by W.F.J. Mueller)\r |
| 481 | \r |
| 482 | \r |
| 483 | /* V3.6 revision history \r |
| 484 | \r |
| 485 | 1 25-Jul-06 sim_console.c:\r |
| 486 | - implemented SET/SHOW PCHAR\r |
| 487 | \r |
| 488 | all DECtapes:\r |
| 489 | - fixed conflict in ATTACH switches\r |
| 490 | \r |
| 491 | hp2100_ms.c (from Dave Bryan):\r |
| 492 | - added CAPACITY as alternate for REEL\r |
| 493 | - fixed EOT test for unlimited reel size\r |
| 494 | \r |
| 495 | i1620_cd.c (from Tom McBride):\r |
| 496 | - fixed card reader fgets call\r |
| 497 | - fixed card reader boot sequence\r |
| 498 | \r |
| 499 | i7094_cd.c:\r |
| 500 | - fixed problem with 80 column full cards\r |
| 501 | \r |
| 502 | i7094_cpu.c:\r |
| 503 | - fixed bug in halt IO wait loop\r |
| 504 | \r |
| 505 | i7094_sys.c:\r |
| 506 | - added binary loader (courtesy of Dave Pitt)\r |
| 507 | \r |
| 508 | pdp1_cpu.c:\r |
| 509 | - fixed bugs in MUS and DIV\r |
| 510 | \r |
| 511 | pdp11_cis.c:\r |
| 512 | - added interrupt tests to character instructions\r |
| 513 | - added 11/44 stack probe test to MOVCx (only)\r |
| 514 | \r |
| 515 | pdp11_dl.c:\r |
| 516 | - first release\r |
| 517 | \r |
| 518 | pdp11_rf.c:\r |
| 519 | - first release\r |
| 520 | \r |
| 521 | pdp11_stddev.c:\r |
| 522 | - added UC support to TTI, TTO\r |
| 523 | \r |
| 524 | pdp18b_cpu.c:\r |
| 525 | - fixed RESET to clear AC, L, and MQ\r |
| 526 | \r |
| 527 | pdp18b_dt.c:\r |
| 528 | - fixed checksum calculation bug for Type 550\r |
| 529 | \r |
| 530 | pdp18b_fpp.c:\r |
| 531 | - fixed bugs in left shift, multiply\r |
| 532 | \r |
| 533 | pdp18b_stddev.c:\r |
| 534 | - fixed Baudot letters/figures inversion for PDP-4\r |
| 535 | - fixed letters/figures tracking for PDP-4\r |
| 536 | - fixed PDP-4/PDP-7 default terminal to be local echo\r |
| 537 | \r |
| 538 | pdp18b_sys.c:\r |
| 539 | - added Fiodec, Baudot display\r |
| 540 | - generalized LOAD to handle HRI, RIM, and BIN files\r |
| 541 | \r |
| 542 | pdp8_ttx.c:\r |
| 543 | - fixed bug in DETACH routine\r |
| 544 | \r |
| 545 | 0 15-May-06 scp.c:\r |
| 546 | - revised save file format to save options, unit capacity\r |
| 547 | \r |
| 548 | sim_tape.c, sim_tape.h:\r |
| 549 | - added support for finite reel size\r |
| 550 | - fixed bug in P7B write record\r |
| 551 | \r |
| 552 | most magtapes:\r |
| 553 | - added support for finite reel size\r |
| 554 | \r |
| 555 | h316_cpu.c: fixed bugs in LLL, LRL (found by Theo Engel)\r |
| 556 | \r |
| 557 | h316_lp.c: fixed bug in blanks backscanning (found by Theo Engel)\r |
| 558 | \r |
| 559 | h316_stddev.c: fixed bugs in punch state handling (found by Theo Engel)\r |
| 560 | \r |
| 561 | i1401_cpu.c: fixed bug in divide (reported by Van Snyder)\r |
| 562 | \r |
| 563 | i16_cpu.c: fixed bug in DH (found by Mark Hittinger)\r |
| 564 | \r |
| 565 | i32_cpu.c:\r |
| 566 | - fixed bug in DH (found by Mark Hittinger)\r |
| 567 | - added support for 8 register banks in 8/32\r |
| 568 | \r |
| 569 | i7094: first release\r |
| 570 | \r |
| 571 | id_io.c: fixed bug, GO preserves EXA and SSTA (found by Davis Johnson)\r |
| 572 | \r |
| 573 | id_idc.c:\r |
| 574 | - fixed WD/WH handling (found by Davis Johnson)\r |
| 575 | - fixed bug, nop command should be ignored (found by Davis Johnson)\r |
| 576 | \r |
| 577 | nova_cpu.c: fixed bug in DIVS (found by Mark Hittinger)\r |
| 578 | \r |
| 579 | pdp11_cis.c: (all reported by John Dundas)\r |
| 580 | - fixed bug in decode table\r |
| 581 | - fixed bug in ASHP\r |
| 582 | - fixed bug in write decimal string with mmgt enabled\r |
| 583 | - fixed bug in 0-length strings in multiply/divide\r |
| 584 | \r |
| 585 | pdp11_cpu.c: fixed order of operand fetching in XOR for SDSD models\r |
| 586 | \r |
| 587 | pdp11_cr.c: added CR11/CD11 support\r |
| 588 | \r |
| 589 | pdp11_tc.c:\r |
| 590 | - fixed READ to set extended data bits in TCST (found by Alan Frisbie)\r |
| 591 | \r |
| 592 | vax780_fload.c: added FLOAD command\r |
| 593 | \r |
| 594 | vax780_sbi.c: fixed writes to ACCS\r |
| 595 | \r |
| 596 | vax780_stddev.c: revised timer logic for EVKAE (reported by Tim Stark)\r |
| 597 | \r |
| 598 | vax_cis.c: (all reported by Tim Stark)\r |
| 599 | - fixed MOVTC, MOVTUC to preserve cc's through page faults\r |
| 600 | - fixed MOVTUC to stop on translated == escape\r |
| 601 | - fixed CVTPL to set registers before destination reg write\r |
| 602 | - fixed CVTPL to set correct cc bit on overflow\r |
| 603 | - fixed EDITPC to preserve cc's through page faults\r |
| 604 | - fixed EDITPC EO$BLANK_ZERO count, cc test\r |
| 605 | - fixed EDITPC EO$INSERT to insert fill instead of blank\r |
| 606 | - fixed EDITPC EO$LOAD_PLUS/MINUS to skip character\r |
| 607 | \r |
| 608 | vax_cpu.c:\r |
| 609 | - added KESU capability to virtual examine\r |
| 610 | - fixed bugs in virtual examine\r |
| 611 | - rewrote CPU history function for improved usability\r |
| 612 | (bugs below reported by Tim Stark)\r |
| 613 | - fixed fault cleanup to clear PSL<tp>\r |
| 614 | - fixed ADAWI r-mode to preserve dst<31:16>\r |
| 615 | - fixed ACBD/G to test correct operand\r |
| 616 | - fixed access checking on modify-class specifiers\r |
| 617 | - fixed branch address calculation in CPU history\r |
| 618 | - fixed bug in reported VA on faulting cross-page write\r |
| 619 | \r |
| 620 | vax_cpu1.c: (all reported by Tim Stark)\r |
| 621 | - added access check on system PTE for 11/780\r |
| 622 | - added mbz check in LDPCTX for 11/780\r |
| 623 | \r |
| 624 | vax_cmode.c: (all reported by Tim Stark)\r |
| 625 | - fixed omission of SXT\r |
| 626 | - fixed order of operand fetching in XOR\r |
| 627 | \r |
| 628 | vax_fpa.c: (all reported by Tim Stark)\r |
| 629 | - fixed POLYD, POLYG to clear R4, R5\r |
| 630 | - fixed POLYD, POLYG to set R3 correctly\r |
| 631 | - fixed POLYD, POLYG to not exit prematurely if arg = 0\r |
| 632 | - fixed POLYD, POLYG to do full 64b multiply\r |
| 633 | - fixed POLYF, POLYD, POLYG to remove truncation on add\r |
| 634 | - fixed POLYF, POLYD, POLYG to mask mul reslt to 31b/63b/63b\r |
| 635 | - fixed fp add routine to test for zero via fraction\r |
| 636 | to support "denormal" argument from POLYF, POLYD, POLYG\r |
| 637 | - fixed bug in 32b floating multiply routine\r |
| 638 | - fixed bug in 64b extended modulus routine\r |
| 639 | \r |
| 640 | vax_mmu.c:\r |
| 641 | - added access check on system PTE for 11/780\r |
| 642 | \r |
| 643 | vax_octa.c: (all reported by Tim Stark)\r |
| 644 | - fixed MNEGH to test negated sign, clear C\r |
| 645 | - fixed carry propagation in qp_inc, qp_neg, qp_add\r |
| 646 | - fixed pack routines to test for zero via fraction\r |
| 647 | - fixed ACBH to set cc's on result\r |
| 648 | - fixed POLYH to set R3 correctly\r |
| 649 | - fixed POLYH to not exit prematurely if arg = 0\r |
| 650 | - fixed POLYH to mask mul reslt to 127b\r |
| 651 | - fixed fp add routine to test for zero via fraction\r |
| 652 | to support "denormal" argument from POLYH\r |
| 653 | - fixed EMODH to concatenate 15b of 16b extension\r |
| 654 | - fixed bug in reported VA on faulting cross-page write\r |
| 655 | \r |
| 656 | \r |
| 657 | /* V3.5 revision history \r |
| 658 | \r |
| 659 | patch date module(s) and fix(es)\r |
| 660 | \r |
| 661 | 2 07-Jan-06 scp.c:\r |
| 662 | - added breakpoint spaces\r |
| 663 | - added REG_FIT support\r |
| 664 | \r |
| 665 | sim_console.c: added ASCII character processing routines\r |
| 666 | \r |
| 667 | sim_tape.c, sim_tape.h:\r |
| 668 | - added write support for P7B format\r |
| 669 | - fixed bug in write forward (found by Dave Bryan)\r |
| 670 | \r |
| 671 | h316_stddev.c, hp2100_stddev.c, hp2100_mux.c, id_tt.c,\r |
| 672 | id_ttp.c, id_pas.c, pdp8_tt.c, pdp8_ttx.c, pdp11_stddev.c,\r |
| 673 | pdp11_dz.c, pdp18b_stddev.c, pdp18b_tt1.c, vax_stddev,\r |
| 674 | gri_stddev.c:\r |
| 675 | - revised to support new character handling routines\r |
| 676 | \r |
| 677 | pdp10_rp.c: fixed DCLR not to clear disk address\r |
| 678 | \r |
| 679 | pdp11_hk.c: fixed overlapped seek interaction with NOP, etc\r |
| 680 | \r |
| 681 | pdp11_rh.c: added enable/disable routine\r |
| 682 | \r |
| 683 | pdp11_rq.c, pdp11_tm.c, pdp11_tq.c, pdp11_ts.c\r |
| 684 | - widened address display to 64b when USE_ADDR64\r |
| 685 | \r |
| 686 | pdp11_rp.c:\r |
| 687 | - fixed DCLR not to clear disk address\r |
| 688 | - fixed device enable/disable logic to include Massbus adapter\r |
| 689 | - widened address display to 64b when USE_ADDR64\r |
| 690 | \r |
| 691 | pdp11_tu.c:\r |
| 692 | - fixed device enable/disable logic to include Massbus adapter\r |
| 693 | - widened address display to 64b when USE_ADDR64\r |
| 694 | - changed default adapter to TM03 (for VMS)\r |
| 695 | \r |
| 696 | pdp8_df.c, pdp8_dt.c, pdp8_rf.c:\r |
| 697 | - fixed unaligned access bug (found by Doug Carman)\r |
| 698 | \r |
| 699 | pdp8_rl.c: fixed IOT 61 decoding bug (found by David Gesswein)\r |
| 700 | \r |
| 701 | vax_cpu.c:\r |
| 702 | - fixed breakpoint detection when USE_ADDR64 option is active\r |
| 703 | - fixed CVTfi to trap on integer overflow if PSW<iv> set\r |
| 704 | \r |
| 705 | 1 15-Oct-05 All CPU's, other sources: fixed declaration inconsistencies\r |
| 706 | (from Sterling Garwood)\r |
| 707 | \r |
| 708 | i1401_cpu.c: added control for old/new character encodings\r |
| 709 | \r |
| 710 | i1401_cd.c, i1401_lpt.c, i1401_tty.c:\r |
| 711 | - changed character encodings to be consistent with 7094\r |
| 712 | - changed column binary format to be consistent with 7094\r |
| 713 | - added choice of business or Fortran set for output encoding\r |
| 714 | \r |
| 715 | i1401_sys.c: changed WM character to ` under new encodings\r |
| 716 | \r |
| 717 | i1620_cd.c, i1620_lpt.c, i1620_tty.c:\r |
| 718 | - changed character encodings to be consistent with 7094\r |
| 719 | \r |
| 720 | pdp10_cpu.c: changed MOVNI to eliminate gcc warning\r |
| 721 | \r |
| 722 | pdp11_io.c: fixed bug in autoconfiguration (missing XU)\r |
| 723 | \r |
| 724 | vax_io.c: fixed bug in autoconfiguration (missing XU)\r |
| 725 | \r |
| 726 | vax_fpa.c: fixed bug in 32b structure definitions (from Jason Stevens)\r |
| 727 | \r |
| 728 | 0 1-Sep-05 Note: most source modules have been edited to improve\r |
| 729 | readability and to fix declaration and cast problems in C++\r |
| 730 | \r |
| 731 | all instruction histories: fixed reversed arguments to calloc\r |
| 732 | \r |
| 733 | scp.c: revised to trim trailing spaces on file inputs\r |
| 734 | \r |
| 735 | sim_sock.c: fixed SIGPIPE error on Unix\r |
| 736 | \r |
| 737 | sim_ether.c: added Windows user-defined adapter names (from Timothe Litt)\r |
| 738 | \r |
| 739 | sim_tape.c: fixed misallocation of TPC map array\r |
| 740 | \r |
| 741 | sim_tmxr.c: added support for SET <unit> DISCONNECT\r |
| 742 | \r |
| 743 | hp2100_mux.c: added SET MUXLn DISCONNECT\r |
| 744 | \r |
| 745 | i1401_cpu.c:\r |
| 746 | - fixed SSB-SSG clearing on RESET (reported by Ralph Reinke)\r |
| 747 | - removed error stops in MCE\r |
| 748 | \r |
| 749 | i1401_cd.c: fixed read, punch to ignore modifier on 1, 4 char inst\r |
| 750 | (reported by Van Snyder)\r |
| 751 | \r |
| 752 | id_pas.c:\r |
| 753 | - fixed bug in SHOW CONN/STATS\r |
| 754 | - added SET PASLn DISCONNECT\r |
| 755 | \r |
| 756 | pdp10_ksio.c: revised for new autoconfiguration interface\r |
| 757 | \r |
| 758 | pdp11_cpu.c: replaced WAIT clock queue check with API call\r |
| 759 | \r |
| 760 | pdp11_cpumod.c: added additional 11/60 registers\r |
| 761 | \r |
| 762 | pdp11_io.c: revised autoconfiguration algorithm and interface\r |
| 763 | \r |
| 764 | pdp11_dz.c: revised for new autoconfiguration interface\r |
| 765 | \r |
| 766 | pdp11_vh.c:\r |
| 767 | - revised for new autoconfiguration interface\r |
| 768 | - fixed bug in vector display routine\r |
| 769 | \r |
| 770 | pdp11_xu.c: fixed runt packet processing (found by Tim Chapman)\r |
| 771 | \r |
| 772 | pdp18b_cpu.c, pdp18b_sys.c:\r |
| 773 | - removed spurious AAS instruction\r |
| 774 | \r |
| 775 | pdp18b_tt1.c:\r |
| 776 | - fixed bug in SHOW CONN/STATS\r |
| 777 | - fixed bug in SET LOG/NOLOG\r |
| 778 | - added SET TTOXn DISCONNECT\r |
| 779 | \r |
| 780 | pdp8_ttx.c:\r |
| 781 | - fixed bug in SHOW CONN/STATS\r |
| 782 | - fixed bug in SET LOG/NOLOG\r |
| 783 | - added SET TTOXn DISCONNECT\r |
| 784 | \r |
| 785 | sds_mux.c:\r |
| 786 | - fixed bug in SHOW CONN/STATS\r |
| 787 | - added SET MUXLn DISCONNECT\r |
| 788 | \r |
| 789 | vaxmod_defs.h: added QDSS support\r |
| 790 | \r |
| 791 | vax_io.c: revised autoconfiguration algorithm and interface\r |
| 792 | \r |
| 793 | /* V3.4 revision history \r |
| 794 | \r |
| 795 | 0 01-May-04 scp.c:\r |
| 796 | - fixed ASSERT code\r |
| 797 | - revised syntax for SET DEBUG (from Dave Bryan)\r |
| 798 | - revised interpretation of fprint_sym, fparse_sym returns\r |
| 799 | - moved DETACH sanity tests into detach_unit\r |
| 800 | \r |
| 801 | sim_sock.h and sim_sock.c:\r |
| 802 | - added test for WSAEINPROGRESS (from Tim Riker)\r |
| 803 | \r |
| 804 | many: revised detach routines to test for attached state\r |
| 805 | \r |
| 806 | hp2100_cpu.c: reorganized CPU options (from Dave Bryan)\r |
| 807 | \r |
| 808 | hp2100_cpu1.c: reorganized EIG routines (from Dave Bryan)\r |
| 809 | \r |
| 810 | hp2100_fp1.c: added FFP support (from Dave Bryan)\r |
| 811 | \r |
| 812 | id16_cpu.c:\r |
| 813 | - fixed bug in show history routine (from Mark Hittinger)\r |
| 814 | - revised examine/deposit to do words rather than bytes\r |
| 815 | \r |
| 816 | id32_cpu.c:\r |
| 817 | - fixed bug in initial memory allocation\r |
| 818 | - fixed bug in show history routine (from Mark Hittinger)\r |
| 819 | - revised examine/deposit to do words rather than bytes\r |
| 820 | \r |
| 821 | id16_sys.c, id32_sys:\r |
| 822 | - revised examine/deposit to do words rather than bytes\r |
| 823 | \r |
| 824 | pdp10_tu.c:\r |
| 825 | - fixed bug, ERASE and WREOF should not clear done (reported\r |
| 826 | by Rich Alderson)\r |
| 827 | - fixed error reporting\r |
| 828 | \r |
| 829 | pdp11_tu.c: fixed error reporting\r |
| 830 | \r |
| 831 | /* V3.3 revision history \r |
| 832 | \r |
| 833 | 2 08-Mar-05 scp.c: added ASSERT command (from Dave Bryan)\r |
| 834 | \r |
| 835 | h316_defs.h: fixed IORETURN macro\r |
| 836 | \r |
| 837 | h316_mt.c: fixed error reporting from OCP (found by Philipp Hachtmann)\r |
| 838 | \r |
| 839 | h316_stddev.c: fixed bug in OCP '0001 (found by Philipp Hachtmann)\r |
| 840 | \r |
| 841 | hp2100_cpu.c: split out EAU and MAC instructions\r |
| 842 | \r |
| 843 | hp2100_cpu1.c: (from Dave Bryan)\r |
| 844 | - fixed missing MPCK on JRS target\r |
| 845 | - removed EXECUTE instruction (is NOP in actual microcode)\r |
| 846 | \r |
| 847 | hp2100_fp: (from Dave Bryan)\r |
| 848 | - fixed missing negative overflow renorm in StoreFP\r |
| 849 | \r |
| 850 | i1401_lp.c: fixed bug in write_line (reported by Van Snyder)\r |
| 851 | \r |
| 852 | id32_cpu.c: fixed branches to mask new PC (from Greg Johnson)\r |
| 853 | \r |
| 854 | pdp11_cpu.c: fixed bugs in RESET for 11/70 (reported by Tim Chapman)\r |
| 855 | \r |
| 856 | pdp11_cpumod.c:\r |
| 857 | - fixed bug in SHOW MODEL (from Sergey Okhapkin)\r |
| 858 | - made SYSID variable for 11/70 (from Tim Chapman)\r |
| 859 | - added MBRK write case for 11/70 (from Tim Chapman)\r |
| 860 | \r |
| 861 | pdp11_rq: added RA60, RA71, RA81 disks\r |
| 862 | \r |
| 863 | pdp11_ry: fixed bug in boot code (reported by Graham Toal)\r |
| 864 | \r |
| 865 | vax_cpu.c: fixed initial state of cpu_extmem\r |
| 866 | \r |
| 867 | 1 05-Jan-05 h316_cpu.c: fixed bug in DIV\r |
| 868 | \r |
| 869 | h316_stddev.c:\r |
| 870 | - fixed bug in SKS '104 (reported by Philipp Hachtmann)\r |
| 871 | - fixed bug in SKS '504\r |
| 872 | - adder reader/punch ASCII file support\r |
| 873 | - added Teletype reader/punch support\r |
| 874 | \r |
| 875 | h316_dp.c: fixed bug in skip on !seeking\r |
| 876 | \r |
| 877 | h316_mt.c: fixed bug in DMA/DMC support\r |
| 878 | \r |
| 879 | h316_lp.c: fixed bug in DMA/DMC support\r |
| 880 | \r |
| 881 | hp2100_cpu.c:\r |
| 882 | - fixed DMA reset to clear alternate CTL flop (from Dave Bryan)\r |
| 883 | - fixed DMA reset to not clear control words (from Dave Bryan)\r |
| 884 | - fixed SBS, CBS, TBS to do virtual reads\r |
| 885 | - separated A/B from M[0/1], for DMA IO (from Dave Bryan)\r |
| 886 | - added SET CPU 21MX-M, 21MX-E (from Dave Brian)\r |
| 887 | - disabled TIMER/EXECUTE/DIAG instructions for 21MX-M (from Dave Bryan)\r |
| 888 | - added post-processor to maintain T/M consistency (from Dave Bryan)\r |
| 889 | \r |
| 890 | hp2100_ds.c: first release\r |
| 891 | \r |
| 892 | hp2100_lps.c (all changes from Dave Bryan)\r |
| 893 | - added restart when set online, etc.\r |
| 894 | - fixed col count for non-printing chars\r |
| 895 | \r |
| 896 | hp2100_lpt.c (all changes from Dave Bryan)\r |
| 897 | - added restart when set online, etc.\r |
| 898 | \r |
| 899 | hp2100_sys.c (all changes from Dave Bryan):\r |
| 900 | - added STOP_OFFLINE, STOP_PWROFF messages\r |
| 901 | \r |
| 902 | i1401_sys.c: added address argument support (from Van Snyder)\r |
| 903 | \r |
| 904 | id_mt.c: added read-only file support\r |
| 905 | \r |
| 906 | lgp_cpu.c, lgp_sys.c: modified VM pointer setup\r |
| 907 | \r |
| 908 | pdp11_cpu.c: fixed WAIT to work in all modes (from John Dundas)\r |
| 909 | \r |
| 910 | pdp11_tm.c, pdp11_ts.c: added read-only file support\r |
| 911 | \r |
| 912 | sds_mt.c: added read-only file support\r |
| 913 | \r |
| 914 | 0 23-Nov-04 scp.c:\r |
| 915 | - added reset_all_p (powerup)\r |
| 916 | - fixed comma-separated SET options (from Dave Bryan)\r |
| 917 | - changed ONLINE/OFFLINE to ENABLED/DISABLED (from Dave Bryan)\r |
| 918 | - modified to flush device buffers on stop (from Dave Bryan)\r |
| 919 | - changed HELP to suppress duplicate command displays\r |
| 920 | \r |
| 921 | sim_console.c:\r |
| 922 | - moved SET/SHOW DEBUG under CONSOLE hierarchy\r |
| 923 | \r |
| 924 | hp2100_cpu.c: (all fixes by Dave Bryan)\r |
| 925 | - moved MP into its own device; added MP option jumpers\r |
| 926 | - modified DMA to allow disabling\r |
| 927 | - modified SET CPU 2100/2116 to truncate memory > 32K\r |
| 928 | - added -F switch to SET CPU to force memory truncation\r |
| 929 | - fixed S-register behavior on 2116\r |
| 930 | - fixed LIx/MIx behavior for DMA on 2116 and 2100\r |
| 931 | - fixed LIx/MIx behavior for empty I/O card slots\r |
| 932 | - modified WRU to be REG_HRO\r |
| 933 | - added BRK and DEL to save console settings\r |
| 934 | - fixed use of "unsigned int16" in cpu_reset\r |
| 935 | \r |
| 936 | hp2100_dp.c: (all fixes by Dave Bryan)\r |
| 937 | - fixed enable/disable from either device\r |
| 938 | - fixed ANY ERROR status for 12557A interface\r |
| 939 | - fixed unattached drive status for 12557A interface\r |
| 940 | - status cmd without prior STC DC now completes (12557A)\r |
| 941 | - OTA/OTB CC on 13210A interface also does CLC CC\r |
| 942 | - fixed RAR model\r |
| 943 | - fixed seek check on 13210 if sector out of range\r |
| 944 | \r |
| 945 | hp2100_dq.c: (all fixes by Dave Bryan)\r |
| 946 | - fixed enable/disable from either device\r |
| 947 | - shortened xtime from 5 to 3 (drive avg 156KW/second)\r |
| 948 | - fixed not ready/any error status\r |
| 949 | - fixed RAR model\r |
| 950 | \r |
| 951 | hp2100_dr.c: (all fixes by Dave Bryan)\r |
| 952 | - fixed enable/disable from either device\r |
| 953 | - fixed sector return in status word\r |
| 954 | - provided protected tracks and "Writing Enabled" status bit\r |
| 955 | - fixed DMA last word write, incomplete sector fill value\r |
| 956 | - added "parity error" status return on writes for 12606\r |
| 957 | - added track origin test for 12606\r |
| 958 | - added SCP test for 12606\r |
| 959 | - fixed 12610 SFC operation\r |
| 960 | - added "Sector Flag" status bit\r |
| 961 | - added "Read Inhibit" status bit for 12606\r |
| 962 | - fixed current-sector determination\r |
| 963 | - added TRACKPROT modifier\r |
| 964 | \r |
| 965 | hp2100_ipl.c, hp2100_ms.c: (all fixes by Dave Bryan)\r |
| 966 | - fixed enable/disable from either device\r |
| 967 | \r |
| 968 | hp2100_lps.c: (all fixes by Dave Bryan)\r |
| 969 | - added SET OFFLINE/ONLINE, POWEROFF/POWERON\r |
| 970 | - fixed status returns for error conditions\r |
| 971 | - fixed handling of non-printing characters\r |
| 972 | - fixed handling of characters after column 80\r |
| 973 | - improved timing model accuracy for RTE\r |
| 974 | - added fast/realistic timing\r |
| 975 | - added debug printouts\r |
| 976 | \r |
| 977 | hp2100_lpt.c: (all fixes by Dave Bryan)\r |
| 978 | - added SET OFFLINE/ONLINE, POWEROFF/POWERON\r |
| 979 | - fixed status returns for error conditions\r |
| 980 | - fixed TOF handling so form remains on line 0\r |
| 981 | \r |
| 982 | hp2100_stddev.c (all fixes by Dave Bryan)\r |
| 983 | - added paper tape loop mode, DIAG/READER modifiers to PTR\r |
| 984 | - added PV_LEFT to PTR TRLLIM register\r |
| 985 | - modified CLK to permit disable\r |
| 986 | \r |
| 987 | hp2100_sys.c: (all fixes by Dave Bryan)\r |
| 988 | - added memory protect device\r |
| 989 | - fixed display of CCA/CCB/CCE instructions\r |
| 990 | \r |
| 991 | i1401_cpu.c: added =n to SHOW HISTORY\r |
| 992 | \r |
| 993 | id16_cpu.c: added instruction history\r |
| 994 | \r |
| 995 | id32_cpu.c: added =n to SHOW HISTORY\r |
| 996 | \r |
| 997 | pdp10_defs.h: revised Unibus DMA API's\r |
| 998 | \r |
| 999 | pdp10_ksio.c: revised Unibus DMA API's\r |
| 1000 | \r |
| 1001 | pdp10_lp20.c: revised Unibus DMA API's\r |
| 1002 | \r |
| 1003 | pdp10_rp.c: replicated register state per drive\r |
| 1004 | \r |
| 1005 | pdp10_tu.c:\r |
| 1006 | - fixed to set FCE on short record\r |
| 1007 | - fixed to return bit<15> in drive type\r |
| 1008 | - fixed format specification, 1:0 are don't cares\r |
| 1009 | - implemented write check\r |
| 1010 | - TMK is cleared by new motion command, not DCLR\r |
| 1011 | - DONE is set on data transfers, ATA on non data transfers\r |
| 1012 | \r |
| 1013 | pdp11_defs.h: \r |
| 1014 | - revised Unibus/Qbus DMA API's\r |
| 1015 | - added CPU type and options flags\r |
| 1016 | \r |
| 1017 | pdp11_cpumod.h, pdp11_cpumod.c:\r |
| 1018 | - new routines for setting CPU type and options\r |
| 1019 | \r |
| 1020 | pdp11_io.c: revised Unibus/Qbus DMA API's\r |
| 1021 | \r |
| 1022 | all PDP-11 DMA peripherals:\r |
| 1023 | - revised Unibus/Qbus DMA API's\r |
| 1024 | \r |
| 1025 | pdp11_hk.c: CS2 OR must be zero for M+\r |
| 1026 | \r |
| 1027 | pdp11_rh.c, pdp11_rp.c, pdp11_tu.c:\r |
| 1028 | - split Massbus adapter from controllers\r |
| 1029 | - replicated RP register state per drive\r |
| 1030 | - added TM02/TM03 with TE16/TU45/TU77 drives\r |
| 1031 | \r |
| 1032 | pdp11_rq.c, pdp11_tq.c:\r |
| 1033 | - provided different default timing for PDP-11, VAX\r |
| 1034 | - revised to report CPU bus type in stage 1\r |
| 1035 | - revised to report controller type reflecting bus type\r |
| 1036 | - added -L switch (LBNs) to RAUSER size specification\r |
| 1037 | \r |
| 1038 | pdp15_cpu.c: added =n to SHOW HISTORY\r |
| 1039 | \r |
| 1040 | pdp15_fpp.c:\r |
| 1041 | - fixed URFST to mask low 9b of fraction\r |
| 1042 | - fixed exception PC setting\r |
| 1043 | \r |
| 1044 | pdp8_cpu.c: added =n to SHOW HISTORY\r |
| 1045 | \r |
| 1046 | vax_defs.h:\r |
| 1047 | - added octaword, compatibility mode support\r |
| 1048 | \r |
| 1049 | vax_moddefs.h: \r |
| 1050 | - revised Unibus/Qbus DMA API's\r |
| 1051 | \r |
| 1052 | vax_cpu.c:\r |
| 1053 | - moved processor-specific code to vax_sysdev.c\r |
| 1054 | - added =n to SHOW HISTORY\r |
| 1055 | \r |
| 1056 | vax_cpu1.c:\r |
| 1057 | - moved processor-specific IPR's to vax_sysdev.c\r |
| 1058 | - moved emulation trap to vax_cis.c\r |
| 1059 | - added support for compatibility mode\r |
| 1060 | \r |
| 1061 | vax_cis.c: new full VAX CIS instruction emulator\r |
| 1062 | \r |
| 1063 | vax_octa.c: new full VAX octaword and h_floating instruction emulator\r |
| 1064 | \r |
| 1065 | vax_cmode.c: new full VAX compatibility mode instruction emulator\r |
| 1066 | \r |
| 1067 | vax_io.c:\r |
| 1068 | - revised Unibus/Qbus DMA API's\r |
| 1069 | \r |
| 1070 | vax_io.c, vax_stddev.c, vax_sysdev.c:\r |
| 1071 | - integrated powerup into RESET (with -p)\r |
| 1072 | \r |
| 1073 | vax_sys.c:\r |
| 1074 | - fixed bugs in parsing indirect displacement modes\r |
| 1075 | - fixed bugs in displaying and parsing character data\r |
| 1076 | \r |
| 1077 | vax_syscm.c: added display and parse for compatibility mode\r |
| 1078 | \r |
| 1079 | vax_syslist.c:\r |
| 1080 | - split from vax_sys.c\r |
| 1081 | - removed PTR, PTP\r |
| 1082 | \r |
| 1083 | /* V3.2 revision history \r |
| 1084 | \r |
| 1085 | 3 03-Sep-04 scp.c:\r |
| 1086 | - added ECHO command (from Dave Bryan)\r |
| 1087 | - qualified RESTORE detach with SIM_SW_REST\r |
| 1088 | \r |
| 1089 | sim_console: added OS/2 EMX fixes (from Holger Veit)\r |
| 1090 | \r |
| 1091 | sim_sock.h: added missing definition for OS/2 (from Holger Veit)\r |
| 1092 | \r |
| 1093 | hp2100_cpu.c: changed error stops to report PC not PC + 1\r |
| 1094 | (from Dave Bryan)\r |
| 1095 | \r |
| 1096 | hp2100_dp.c: functional and timing fixes (from Dave Bryan)\r |
| 1097 | - controller sets ATN for all commands except read status\r |
| 1098 | - controller resumes polling for ATN interrupts after read status\r |
| 1099 | - check status on unattached drive set busy and not ready\r |
| 1100 | - check status tests wrong unit for write protect status\r |
| 1101 | - drive on line sets ATN, will set FLG if polling\r |
| 1102 | \r |
| 1103 | hp2100_dr.c: fixed CLC to stop operation (from Dave Bryan)\r |
| 1104 | \r |
| 1105 | hp2100_ms.c: functional and timing fixes (from Dave Bryan)\r |
| 1106 | - fixed erroneous execution of rejected command\r |
| 1107 | - fixed erroneous execution of select-only command\r |
| 1108 | - fixed erroneous execution of clear command\r |
| 1109 | - fixed odd byte handling for read\r |
| 1110 | - fixed spurious odd byte status on 13183A EOF\r |
| 1111 | - modified handling of end of medium\r |
| 1112 | - added detailed timing, with fast and realistic modes\r |
| 1113 | - added reel sizes to simulate end of tape\r |
| 1114 | - added debug printouts\r |
| 1115 | \r |
| 1116 | hp2100_mt.c: modified handling of end of medium (from Dave Bryan)\r |
| 1117 | \r |
| 1118 | hp2100_stddev.c: added tab to control char set (from Dave Bryan)\r |
| 1119 | \r |
| 1120 | pdp11_rq.c: VAX controllers luns start at 0 (from Andreas Cejna)\r |
| 1121 | \r |
| 1122 | vax_cpu.c: fixed bug in EMODD/G, second word of quad dst not probed\r |
| 1123 | \r |
| 1124 | 2 17-Jul-04 scp.c: fixed problem ATTACHing to read only files\r |
| 1125 | (found by John Dundas)\r |
| 1126 | \r |
| 1127 | sim_console.c: revised Windows console code (from Dave Bryan)\r |
| 1128 | \r |
| 1129 | sim_fio.c: fixed problem in big-endian read\r |
| 1130 | (reported by Scott Bailey)\r |
| 1131 | \r |
| 1132 | gri_cpu.c: updated MSR, EAO functions\r |
| 1133 | \r |
| 1134 | hp_stddev.c: generalized handling of control char echoing\r |
| 1135 | (from Dave Bryan)\r |
| 1136 | \r |
| 1137 | vax_sys.c: fixed bad block initialization routine\r |
| 1138 | \r |
| 1139 | 1 10-Jul-04 scp.c: added SET/SHOW CONSOLE subhierarchy\r |
| 1140 | \r |
| 1141 | hp2100_cpu.c: fixes and added features (from Dave Bryan)\r |
| 1142 | - SBT increments B after store\r |
| 1143 | - DMS console map must check dms_enb\r |
| 1144 | - SFS x,C and SFC x,C work\r |
| 1145 | - MP violation clears automatically on interrupt\r |
| 1146 | - SFS/SFC 5 is not gated by protection enabled\r |
| 1147 | - DMS enable does not disable mem prot checks\r |
| 1148 | - DMS status inconsistent at simulator halt\r |
| 1149 | - Examine/deposit are checking wrong addresses\r |
| 1150 | - Physical addresses are 20b not 15b\r |
| 1151 | - Revised DMS to use memory rather than internal format\r |
| 1152 | - Added instruction printout to HALT message\r |
| 1153 | - Added M and T internal registers\r |
| 1154 | - Added N, S, and U breakpoints\r |
| 1155 | Revised IBL facility to conform to microcode\r |
| 1156 | Added DMA EDT I/O pseudo-opcode\r |
| 1157 | Separated DMA SRQ (service request) from FLG\r |
| 1158 | \r |
| 1159 | all HP2100 peripherals:\r |
| 1160 | - revised to make SFS x,C and SFC x,C work\r |
| 1161 | - revised to separate SRQ from FLG\r |
| 1162 | \r |
| 1163 | all HP2100 IBL bootable peripherals:\r |
| 1164 | - revised boot ROMs to use IBL facility\r |
| 1165 | - revised SR values to preserve SR<5:3>\r |
| 1166 | \r |
| 1167 | hp2100_lps.c, hp2100_lpt.c: fixed timing\r |
| 1168 | \r |
| 1169 | hp2100_dp.c: fixed interpretation of SR<0>\r |
| 1170 | \r |
| 1171 | hp2100_dr.c: revised boot code to use IBL algorithm\r |
| 1172 | \r |
| 1173 | hp2100_mt.c, hp2100_ms.c: fixed spurious timing error after CLC\r |
| 1174 | (found by Dave Bryan)\r |
| 1175 | \r |
| 1176 | hp2100_stddev.c:\r |
| 1177 | - fixed input behavior during typeout for RTE-IV\r |
| 1178 | - suppressed nulls on TTY output for RTE-IV\r |
| 1179 | \r |
| 1180 | hp2100_sys.c: added SFS x,C and SFC x,C to print/parse routines\r |
| 1181 | \r |
| 1182 | pdp10_fe.c, pdp11_stddev.c, pdp18b_stddev.c, pdp8_tt.c, vax_stddev.c:\r |
| 1183 | - removed SET TTI CTRL-C option\r |
| 1184 | \r |
| 1185 | pdp11_tq.c:\r |
| 1186 | - fixed bug in reporting write protect (reported by Lyle Bickley)\r |
| 1187 | - fixed TK70 model number and media ID (found by Robert Schaffrath)\r |
| 1188 | \r |
| 1189 | pdp11_vh.c: added DHQ11 support (from John Dundas)\r |
| 1190 | \r |
| 1191 | pdp11_io.c, vax_io.c: fixed DHQ11 autoconfigure (from John Dundas)\r |
| 1192 | \r |
| 1193 | pdp11_sys.c, vax_sys.c: added DHQ11 support (from John Dundas)\r |
| 1194 | \r |
| 1195 | vax_cpu.c: fixed bug in DIVBx, DIVWx (reported by Peter Trimmel)\r |
| 1196 | \r |
| 1197 | 0 04-Apr-04 scp.c:\r |
| 1198 | - added sim_vm_parse_addr and sim_vm_fprint_addr\r |
| 1199 | - added REG_VMAD\r |
| 1200 | - moved console logging to SCP\r |
| 1201 | - changed sim_fsize to use descriptor rather than name\r |
| 1202 | - added global device/unit show modifiers\r |
| 1203 | - added device debug support (Dave Hittner)\r |
| 1204 | - moved device and unit flags, updated save format\r |
| 1205 | \r |
| 1206 | sim_ether.c:\r |
| 1207 | - further generalizations (Dave Hittner, Mark Pizzolato)\r |
| 1208 | \r |
| 1209 | sim_tmxr.h, sim_tmxr.c:\r |
| 1210 | - added tmxr_linemsg\r |
| 1211 | - changed TMXR definition to support variable number of lines\r |
| 1212 | \r |
| 1213 | sim_libraries:\r |
| 1214 | - new console library (sim_console.h, sim_console.c)\r |
| 1215 | - new file I/O library (sim_fio.h, sim_fio.c)\r |
| 1216 | - new timer library (sim_timer.h, sim_timer.c)\r |
| 1217 | \r |
| 1218 | all terminal multiplexors: revised for tmxr library changes\r |
| 1219 | \r |
| 1220 | all DECtapes:\r |
| 1221 | - added STOP_EOR to enable end-of-reel stop\r |
| 1222 | - revised for device debug support\r |
| 1223 | \r |
| 1224 | all variable-sized devices: revised for sim_fsize change\r |
| 1225 | \r |
| 1226 | eclipse_cpu.c, nova_cpu.c: fixed device enable/disable support\r |
| 1227 | (found by Bruce Ray)\r |
| 1228 | \r |
| 1229 | nova_defs.h, nova_sys.c, nova_qty.c:\r |
| 1230 | - added QTY and ALM support (Bruce Ray)\r |
| 1231 | \r |
| 1232 | id32_cpu.c, id_dp.c: revised for device debug support\r |
| 1233 | \r |
| 1234 | lgp: added LGP-30 [LGP-21] simulator\r |
| 1235 | \r |
| 1236 | pdp1_sys.c: fixed bug in LOAD (found by Mark Crispin)\r |
| 1237 | \r |
| 1238 | pdp10_mdfp.c:\r |
| 1239 | - fixed bug in floating unpack\r |
| 1240 | - fixed bug in FIXR (found by Philip Stone, fixed by Chris Smith)\r |
| 1241 | \r |
| 1242 | pdp11_dz.c: added per-line logging\r |
| 1243 | \r |
| 1244 | pdp11_rk.c:\r |
| 1245 | - added formatting support\r |
| 1246 | - added address increment inhibit support\r |
| 1247 | - added transfer overrun detection\r |
| 1248 | \r |
| 1249 | pdp11_hk.c, pdp11_rp.c: revised for device debug support\r |
| 1250 | \r |
| 1251 | pdp11_rq.c: fixed bug in interrupt control (found by Tom Evans)\r |
| 1252 | \r |
| 1253 | pdp11_ry.c: added VAX support\r |
| 1254 | \r |
| 1255 | pdp11_tm.c, pdp11_tq.c, pdp11_ts.c: revised for device debug support\r |
| 1256 | \r |
| 1257 | pdp11_xu.c: replaced stub with real implementation (Dave Hittner)\r |
| 1258 | \r |
| 1259 | pdp18b_cpu.c:\r |
| 1260 | - fixed bug in XVM g_mode implementation\r |
| 1261 | - fixed bug in PDP-15 indexed address calculation\r |
| 1262 | - fixed bug in PDP-15 autoindexed address calculation\r |
| 1263 | \r |
| 1264 | pdp18b_fpp.c: fixed bugs in instruction decode\r |
| 1265 | \r |
| 1266 | pdp18b_stddev.c:\r |
| 1267 | - fixed clock response to CAF\r |
| 1268 | - fixed bug in hardware read-in mode bootstrap\r |
| 1269 | \r |
| 1270 | pdp18b_sys.c: fixed XVM instruction decoding errors\r |
| 1271 | \r |
| 1272 | pdp18b_tt1.c: added support for 1-16 additional terminals\r |
| 1273 | \r |
| 1274 | vax_moddef.h, vax_cpu.c, vax_sysdev.c:\r |
| 1275 | - added extended physical memory support (Mark Pizzolato)\r |
| 1276 | - added RXV21 support\r |
| 1277 | \r |
| 1278 | vax_cpu1.c:\r |
| 1279 | - added PC read fault in EXTxV\r |
| 1280 | - fixed PC write fault in INSV\r |
| 1281 | \r |
| 1282 | /* V3.1 revision history\r |
| 1283 | \r |
| 1284 | 0 29-Dec-03 sim_defs.h, scp.c: added output stall status\r |
| 1285 | \r |
| 1286 | all console emulators: added output stall support\r |
| 1287 | \r |
| 1288 | sim_ether.c (Dave Hittner, Mark Pizzolato, Anders Ahgren):\r |
| 1289 | - added Alpha/VMS support\r |
| 1290 | - added FreeBSD, Mac OS/X support\r |
| 1291 | - added TUN/TAP support\r |
| 1292 | - added DECnet duplicate address detection\r |
| 1293 | \r |
| 1294 | all memory buffered devices (fixed head disks, floppy disks):\r |
| 1295 | - cleaned up buffer copy code\r |
| 1296 | \r |
| 1297 | all DECtapes:\r |
| 1298 | - fixed reverse checksum in read all\r |
| 1299 | - added DECtape off reel message\r |
| 1300 | - simplified timing\r |
| 1301 | \r |
| 1302 | eclipse_cpu.c (Charles Owen):\r |
| 1303 | - added floating point support\r |
| 1304 | - added programmable interval timer support\r |
| 1305 | - bug fixes\r |
| 1306 | \r |
| 1307 | h316_cpu.c:\r |
| 1308 | - added instruction history\r |
| 1309 | - added DMA/DMC support\r |
| 1310 | - added device ENABLE/DISABLE support\r |
| 1311 | - change default to HSA option included\r |
| 1312 | \r |
| 1313 | h316_dp.c: added moving head disk support\r |
| 1314 | \r |
| 1315 | h316_fhd.c: added fixed head disk support\r |
| 1316 | \r |
| 1317 | h316_mt.c: added magtape support\r |
| 1318 | \r |
| 1319 | h316_sys.c: added new device support\r |
| 1320 | \r |
| 1321 | nova_dkp.c (Charles Owen):\r |
| 1322 | - fixed bug in flag clear sequence\r |
| 1323 | - added diagnostic mode support for disk sizing\r |
| 1324 | \r |
| 1325 | ` nova_mt.c (Charles Owen):\r |
| 1326 | - fixed bug, space operations return record count\r |
| 1327 | - fixed bug, reset doesn't cancel rewind\r |
| 1328 | \r |
| 1329 | nova_sys.c: added floating point, timer support (from Charles Owen)\r |
| 1330 | \r |
| 1331 | i1620_cpu.c: fixed bug in branch digit (found by Dave Babcock)\r |
| 1332 | \r |
| 1333 | pdp1_drm.c:\r |
| 1334 | - added parallel drum support\r |
| 1335 | - fixed bug in serial drum instructin decoding\r |
| 1336 | \r |
| 1337 | pdp1_sys.c: added parallel drum support, mnemonics\r |
| 1338 | \r |
| 1339 | pdp11_cpu.c:\r |
| 1340 | - added autoconfiguration controls\r |
| 1341 | - added support for 18b-only Qbus devices\r |
| 1342 | - cleaned up addressing/bus definitions\r |
| 1343 | \r |
| 1344 | pdp11_rk.c, pdp11_ry.c, pdp11_tm.c, pdp11_hk.c:\r |
| 1345 | - added Q18 attribute\r |
| 1346 | \r |
| 1347 | pdp11_io.c:\r |
| 1348 | - added autoconfiguration controls\r |
| 1349 | - fixed bug in I/O configuration (found by Dave Hittner)\r |
| 1350 | \r |
| 1351 | pdp11_rq.c:\r |
| 1352 | - revised MB->LBN conversion for greater accuracy\r |
| 1353 | - fixed bug with multiple RAUSER drives\r |
| 1354 | \r |
| 1355 | pdp11_tc.c: changed to be off by default (base config is Qbus)\r |
| 1356 | \r |
| 1357 | pdp11_xq.c (Dave Hittner, Mark Pizzolato):\r |
| 1358 | - fixed second controller interrupts\r |
| 1359 | - fixed bugs in multicast and promiscuous setup\r |
| 1360 | \r |
| 1361 | pdp18b_cpu.c:\r |
| 1362 | - added instruction history\r |
| 1363 | - fixed PDP-4,-7,-9 autoincrement bug\r |
| 1364 | - change PDP-7,-9 default to API option included\r |
| 1365 | \r |
| 1366 | pdp8_defs.h, pdp8_sys.c:\r |
| 1367 | - added DECtape off reel message\r |
| 1368 | - added support for TSC8-75 (ETOS) option\r |
| 1369 | - added support for TD8E controller\r |
| 1370 | \r |
| 1371 | pdp8_cpu.c: added instruction history\r |
| 1372 | \r |
| 1373 | pdp8_rx.c:\r |
| 1374 | - fixed bug in RX28 read status (found by Charles Dickman)\r |
| 1375 | - fixed double density write\r |
| 1376 | \r |
| 1377 | pdp8_td.c: added TD8E controller\r |
| 1378 | \r |
| 1379 | pdp8_tsc.c: added TSC8-75 option\r |
| 1380 | \r |
| 1381 | vax_cpu.c:\r |
| 1382 | - revised instruction history for dynamic sizing\r |
| 1383 | - added autoconfiguration controls\r |
| 1384 | \r |
| 1385 | vax_io.c:\r |
| 1386 | - added autoconfiguration controls\r |
| 1387 | - fixed bug in I/O configuration (found by Dave Hittner)\r |
| 1388 | \r |
| 1389 | id16_cpu.c: revised instruction decoding\r |
| 1390 | \r |
| 1391 | id32_cpu.c:\r |
| 1392 | - revised instruction decoding\r |
| 1393 | - added instruction history\r |
| 1394 | \r |
| 1395 | /* V3.0 revision history \r |
| 1396 | \r |
| 1397 | 2 15-Sep-03 scp.c:\r |
| 1398 | - fixed end-of-file problem in dep, idep\r |
| 1399 | - fixed error on trailing spaces in dep, idep\r |
| 1400 | \r |
| 1401 | pdp1_stddev.c\r |
| 1402 | - fixed system hang if continue after PTR error\r |
| 1403 | - added PTR start/stop functionality\r |
| 1404 | - added address switch functionality to PTR BOOT\r |
| 1405 | \r |
| 1406 | pdp1_sys.c: added multibank capability to LOAD\r |
| 1407 | \r |
| 1408 | pdp18b_cpu.c:\r |
| 1409 | - fixed priorities in PDP-15 API (PI between 3 and 4)\r |
| 1410 | - fixed sign handling in PDP-15 unsigned mul/div\r |
| 1411 | - fixed bug in CAF, must clear API subsystem\r |
| 1412 | \r |
| 1413 | i1401_mt.c:\r |
| 1414 | - fixed tape read end-of-record handling based on real 1401\r |
| 1415 | - added diagnostic read (space forward)\r |
| 1416 | \r |
| 1417 | i1620_cpu.c\r |
| 1418 | - fixed bug in immediate index add (found by Michael Short)\r |
| 1419 | \r |
| 1420 | 1 27-Jul-03 pdp1_cpu.c: updated to detect indefinite I/O wait\r |
| 1421 | \r |
| 1422 | pdp1_drm.c: fixed incorrect logical, missing activate, break\r |
| 1423 | \r |
| 1424 | pdp1_lp.c:\r |
| 1425 | - fixed bugs in instruction decoding, overprinting\r |
| 1426 | - updated to detect indefinite I/O wait\r |
| 1427 | \r |
| 1428 | pdp1_stddev.c:\r |
| 1429 | - changed RIM loader to be "hardware"\r |
| 1430 | - updated to detect indefinite I/O wait\r |
| 1431 | \r |
| 1432 | pdp1_sys.c: added block loader format support to LOAD\r |
| 1433 | \r |
| 1434 | pdp10_rp.c: fixed bug in read header\r |
| 1435 | \r |
| 1436 | pdp11_rq: fixed bug in user disk size (found by Chaskiel M Grundman)\r |
| 1437 | \r |
| 1438 | pdp18b_cpu.c:\r |
| 1439 | - added FP15 support\r |
| 1440 | - added XVM support\r |
| 1441 | - added EAE support to the PDP-4\r |
| 1442 | - added PDP-15 "re-entrancy ECO"\r |
| 1443 | - fixed memory protect/skip interaction\r |
| 1444 | - fixed CAF to only reset peripherals\r |
| 1445 | \r |
| 1446 | pdp18b_fpp.c: added FP15\r |
| 1447 | \r |
| 1448 | pdp18b_lp.c: fixed bug in Type 62 overprinting\r |
| 1449 | \r |
| 1450 | pdp18b_rf.c: fixed bug in set size routine\r |
| 1451 | \r |
| 1452 | pdp18b_stddev.c:\r |
| 1453 | - increased PTP TIME for PDP-15 operating systems\r |
| 1454 | - added hardware RIM loader for PDP-7, PDP-9, PDP-15\r |
| 1455 | \r |
| 1456 | pdp18b_sys.c: added FP15, KT15, XVM instructions\r |
| 1457 | \r |
| 1458 | pdp8b_df.c, pdp8_rf.c: fixed bug in set size routine\r |
| 1459 | \r |
| 1460 | hp2100_dr.c:\r |
| 1461 | - fixed drum sizes\r |
| 1462 | - fixed variable capacity interaction with SAVE/RESTORE\r |
| 1463 | \r |
| 1464 | i1401_cpu.c: revised fetch to model hardware more closely\r |
| 1465 | \r |
| 1466 | ibm1130: fixed bugs found by APL 1130\r |
| 1467 | \r |
| 1468 | nova_dsk.c: fixed bug in set size routine\r |
| 1469 | \r |
| 1470 | altairz80: fixed bug in real-time clock on Windows host\r |
| 1471 | \r |
| 1472 | 0 15-Jun-03 scp.c:\r |
| 1473 | - added ASSIGN/DEASSIGN\r |
| 1474 | - changed RESTORE to detach files\r |
| 1475 | - added u5, u6 unit fields\r |
| 1476 | - added USE_ADDR64 support\r |
| 1477 | - changed some structure fields to unsigned\r |
| 1478 | \r |
| 1479 | scp_tty.c: added extended file seek\r |
| 1480 | \r |
| 1481 | sim_sock.c: fixed calling sequence in stubs\r |
| 1482 | \r |
| 1483 | sim_tape.c:\r |
| 1484 | - added E11 and TPC format support\r |
| 1485 | - added extended file support\r |
| 1486 | \r |
| 1487 | sim_tmxr.c: fixed bug in SHOW CONNECTIONS\r |
| 1488 | \r |
| 1489 | all magtapes:\r |
| 1490 | - added multiformat support\r |
| 1491 | - added extended file support\r |
| 1492 | \r |
| 1493 | i1401_cpu.c:\r |
| 1494 | - fixed mnemonic, instruction lengths, and reverse\r |
| 1495 | scan length check bug for MCS\r |
| 1496 | - fixed MCE bug, BS off by 1 if zero suppress\r |
| 1497 | - fixed chaining bug, D lost if return to SCP\r |
| 1498 | - fixed H branch, branch occurs after continue\r |
| 1499 | - added check for invalid 8 character MCW, LCA\r |
| 1500 | \r |
| 1501 | i1401_mt.c: fixed load-mode end of record response\r |
| 1502 | \r |
| 1503 | nova_dsk.c: fixed variable size interaction with restore\r |
| 1504 | \r |
| 1505 | pdp1_dt.c: fixed variable size interaction with restore\r |
| 1506 | \r |
| 1507 | pdp10_rp.c: fixed ordering bug in attach\r |
| 1508 | \r |
| 1509 | pdp11_cpu.c:\r |
| 1510 | - fixed bug in MMR1 update (found by Tim Stark)\r |
| 1511 | - fixed bug in memory size table\r |
| 1512 | \r |
| 1513 | pdp11_lp.c, pdp11_rq.c: added extended file support\r |
| 1514 | \r |
| 1515 | pdp11_rl.c, pdp11_rp.c, pdp11_ry.c: fixed ordering bug in attach\r |
| 1516 | \r |
| 1517 | pdp11_tc.c: fixed variable size interaction with restore\r |
| 1518 | \r |
| 1519 | pdp11_xq.c:\r |
| 1520 | - corrected interrupts on IE state transition (code by Tom Evans)\r |
| 1521 | - added interrupt clear on soft reset (first noted by Bob Supnik)\r |
| 1522 | - removed interrupt when setting XL or RL (multiple people)\r |
| 1523 | - added SET/SHOW XQ STATS\r |
| 1524 | - added SHOW XQ FILTERS\r |
| 1525 | - added ability to split received packet into multiple buffers\r |
| 1526 | - added explicit runt & giant packet processing\r |
| 1527 | \r |
| 1528 | vax_fpa.c:\r |
| 1529 | - fixed integer overflow bug in CVTfi\r |
| 1530 | - fixed multiple bugs in EMODf\r |
| 1531 | \r |
| 1532 | vax_io.c: optimized byte and word DMA routines\r |
| 1533 | \r |
| 1534 | vax_sysdev.c:\r |
| 1535 | - added calibrated delay to ROM reads (from Mark Pizzolato)\r |
| 1536 | - fixed calibration problems in interval timer (from Mark Pizzolato)\r |
| 1537 | \r |
| 1538 | pdp1_dt.c: fixed variable size interaction with restore\r |
| 1539 | \r |
| 1540 | pdp18b_dt.c: fixed variable size interaction with restore\r |
| 1541 | \r |
| 1542 | pdp18b_mt.c: fixed bug in MTTR\r |
| 1543 | \r |
| 1544 | pdp18b_rf.c: fixed variable size interaction with restore\r |
| 1545 | \r |
| 1546 | pdp8_df.c, pdp8_rf.c: fixed variable size interaction\r |
| 1547 | with restore\r |
| 1548 | \r |
| 1549 | pdp8_dt.c: fixed variable size interaction with restore\r |
| 1550 | \r |
| 1551 | pdp8_mt.c: fixed bug in SKTR\r |
| 1552 | \r |
| 1553 | hp2100_dp.c,hp2100_dq.c:\r |
| 1554 | - fixed bug in read status (13210A controller)\r |
| 1555 | - fixed bug in seek completion\r |
| 1556 | \r |
| 1557 | id_pt.c: fixed type declaration (found by Mark Pizzolato)\r |
| 1558 | \r |
| 1559 | gri_cpu.c: fixed bug in SC queue pointer management\r |
| 1560 | \r |
| 1561 | /* V2.10 revision history\r |
| 1562 | \r |
| 1563 | 4 03-Mar-03 scp.c\r |
| 1564 | - added .ini startup file capability\r |
| 1565 | - added multiple breakpoint actions\r |
| 1566 | - added multiple switch evaluation points\r |
| 1567 | - fixed bug in multiword deposits to file\r |
| 1568 | \r |
| 1569 | sim_tape.c: magtape simulation library\r |
| 1570 | \r |
| 1571 | h316_stddev.c: added set line frequency command\r |
| 1572 | \r |
| 1573 | hp2100_mt.c, hp2100_ms.c: revised to use magtape library\r |
| 1574 | \r |
| 1575 | i1401_mt.c: revised to use magtape library\r |
| 1576 | \r |
| 1577 | id_dp.c, id_idc.c: fixed cylinder overflow on writes\r |
| 1578 | \r |
| 1579 | id_mt.c:\r |
| 1580 | - fixed error handling to stop selector channel\r |
| 1581 | - revised to use magtape library\r |
| 1582 | \r |
| 1583 | id16_sys.c, id32_sys.c: added relative addressing support\r |
| 1584 | \r |
| 1585 | id_uvc.c:\r |
| 1586 | - added set frequency command to line frequency clock\r |
| 1587 | - improved calibration algorithm for precision clock\r |
| 1588 | \r |
| 1589 | nova_clk.c: added set line frequency command\r |
| 1590 | \r |
| 1591 | nova_dsk.c: fixed autosizing algorithm\r |
| 1592 | \r |
| 1593 | nova_mt.c: revised to use magtape library\r |
| 1594 | \r |
| 1595 | pdp10_tu.c: revised to use magtape library\r |
| 1596 | \r |
| 1597 | pdp11_cpu.c: fixed bug in MMR1 update (found by Tim Stark)\r |
| 1598 | \r |
| 1599 | pdp11_stddev.c\r |
| 1600 | - added set line frequency command\r |
| 1601 | - added set ctrl-c command\r |
| 1602 | \r |
| 1603 | pdp11_rq.c:\r |
| 1604 | - fixed ordering problem in queue process\r |
| 1605 | - fixed bug in vector calculation for VAXen\r |
| 1606 | - added user defined drive support\r |
| 1607 | \r |
| 1608 | pdp11_ry.c: fixed autosizing algorithm\r |
| 1609 | \r |
| 1610 | pdp11_tm.c, pdp11_ts.c: revised to use magtape library\r |
| 1611 | \r |
| 1612 | pdp11_tq.c:\r |
| 1613 | - fixed ordering problem in queue process\r |
| 1614 | - fixed overly restrictive test for bad modifiers\r |
| 1615 | - fixed bug in vector calculation for VAXen\r |
| 1616 | - added variable controller, user defined drive support\r |
| 1617 | - revised to use magtape library\r |
| 1618 | \r |
| 1619 | pdp18b_cpu.c: fixed three EAE bugs (found by Hans Pufal)\r |
| 1620 | \r |
| 1621 | pdp18b_mt.c:\r |
| 1622 | - fixed bugs in BOT error handling, interrupt handling\r |
| 1623 | - revised to use magtape library\r |
| 1624 | \r |
| 1625 | pdp18b_rf.c:\r |
| 1626 | - removed 22nd bit from disk address\r |
| 1627 | - fixed autosizing algorithm\r |
| 1628 | \r |
| 1629 | pdp18b_stddev.c:\r |
| 1630 | - added set line frequency command\r |
| 1631 | - added set ctrl-c command\r |
| 1632 | \r |
| 1633 | pdp18b_sys.c: fixed FMTASC printouts (found by Hans Pufal)\r |
| 1634 | \r |
| 1635 | pdp8_clk.c: added set line frequency command\r |
| 1636 | \r |
| 1637 | pdp8_df.c, pdp8_rf.c, pdp8_rx.c: fixed autosizing algorithm\r |
| 1638 | \r |
| 1639 | pdp8_mt.c:\r |
| 1640 | - fixed bug in BOT error handling\r |
| 1641 | - revised to use magtape library\r |
| 1642 | \r |
| 1643 | pdp8_tt.c: added set ctrl-c command\r |
| 1644 | \r |
| 1645 | sds_cpu.c: added set line frequency command\r |
| 1646 | \r |
| 1647 | sds_mt.c: revised to use magtape library\r |
| 1648 | \r |
| 1649 | vax_stddev.c: added set ctrl-c command\r |
| 1650 | \r |
| 1651 | 3 06-Feb-03 scp.c:\r |
| 1652 | - added dynamic extension of the breakpoint table\r |
| 1653 | - added breakpoint actions\r |
| 1654 | \r |
| 1655 | hp2100_cpu.c: fixed last cycle bug in DMA output (found by\r |
| 1656 | Mike Gemeny)\r |
| 1657 | \r |
| 1658 | hp2100_ipl.c: individual links are full duplex (found by\r |
| 1659 | Mike Gemeny)\r |
| 1660 | \r |
| 1661 | pdp11_cpu.c: changed R, SP to track PSW<rs,cm> respectively\r |
| 1662 | \r |
| 1663 | pdp18b_defs.h, pdp18b_sys.c: added RB09 fixed head disk,\r |
| 1664 | LP09 printer\r |
| 1665 | \r |
| 1666 | pdp18b_rf.c:\r |
| 1667 | - fixed IOT decoding (found by Hans Pufal)\r |
| 1668 | - fixed address overrun logic\r |
| 1669 | - added variable number of platters and autosizing\r |
| 1670 | \r |
| 1671 | pdp18b_rf.c:\r |
| 1672 | - fixed IOT decoding\r |
| 1673 | - fixed bug in command initiation\r |
| 1674 | \r |
| 1675 | pdp18b_rb.c: new RB09 fixed head disk\r |
| 1676 | \r |
| 1677 | pdp18b_lp.c: new LP09 line printer\r |
| 1678 | \r |
| 1679 | pdp8_df.c: added variable number of platters and autosizing\r |
| 1680 | \r |
| 1681 | pdp8_rf.c: added variable number of platters and autosizing\r |
| 1682 | \r |
| 1683 | nova_dsk.c: added variable number of platters and autosizing\r |
| 1684 | \r |
| 1685 | id16_cpu.c: fixed bug in SETM, SETMR (found by Mark Pizzolato)\r |
| 1686 | \r |
| 1687 | 2 15-Jan-03 scp.c:\r |
| 1688 | - added dynamic memory size flag and RESTORE support\r |
| 1689 | - added EValuate command\r |
| 1690 | - added get_ipaddr routine\r |
| 1691 | - added ! (OS command) feature (from Mark Pizzolato)\r |
| 1692 | - added BREAK support to sim_poll_kbd (from Mark Pizzolato)\r |
| 1693 | \r |
| 1694 | sim_tmxr.c:\r |
| 1695 | - fixed bugs in IAC+IAC handling (from Mark Pizzolato)\r |
| 1696 | - added IAC+BRK handling (from Mark Pizzolato)\r |
| 1697 | \r |
| 1698 | sim_sock.c:\r |
| 1699 | - added use count for Windows start/stop\r |
| 1700 | - added sim_connect_sock\r |
| 1701 | \r |
| 1702 | pdp1_defs.h, pdp1_cpu.c, pdp1_sys.c, pdp1_drm.c:\r |
| 1703 | added Type 24 serial drum\r |
| 1704 | \r |
| 1705 | pdp18_defs.h: added PDP-4 drum support\r |
| 1706 | \r |
| 1707 | hp2100_cpu.c: added 21MX IOP support\r |
| 1708 | \r |
| 1709 | hp2100_ipl.c: added HP interprocessor link support\r |
| 1710 | \r |
| 1711 | pdp11_tq.c: fixed bug in transfer end packet length\r |
| 1712 | \r |
| 1713 | pdp11_xq.c:\r |
| 1714 | - added VMScluster support (thanks to Mark Pizzolato)\r |
| 1715 | - added major performance enhancements (thanks to Mark Pizzolato)\r |
| 1716 | - added local packet processing\r |
| 1717 | - added system id broadcast\r |
| 1718 | \r |
| 1719 | pdp11_stddev.c: changed default to 7b (for early UNIX)\r |
| 1720 | \r |
| 1721 | vax_cpu.c, vax_io.c, vax_stddev.c, vax_sysdev.c:\r |
| 1722 | added console halt capability (from Mark Pizzolato)\r |
| 1723 | \r |
| 1724 | all terminals and multiplexors: added BREAK support\r |
| 1725 | \r |
| 1726 | 1 21-Nov-02 pdp1_stddev.c: changed typewriter to half duplex\r |
| 1727 | (found by Derek Peschel)\r |
| 1728 | \r |
| 1729 | pdp10_tu.c:\r |
| 1730 | - fixed bug in bootstrap (reported by Michael Thompson)\r |
| 1731 | - fixed bug in read (reported by Harris Newman)\r |
| 1732 | \r |
| 1733 | 0 15-Nov-02 SCP and libraries\r |
| 1734 | scp.c:\r |
| 1735 | - added Telnet console support\r |
| 1736 | - removed VT emulation support\r |
| 1737 | - added support for statically buffered devices\r |
| 1738 | - added HELP <command>\r |
| 1739 | - fixed bugs in set_logon, ssh_break (found by David Hittner)\r |
| 1740 | - added VMS file optimization (from Robert Alan Byer)\r |
| 1741 | - added quiet mode, DO with parameters, GUI interface,\r |
| 1742 | extensible commands (from Brian Knittel)\r |
| 1743 | - added DEVICE context and flags\r |
| 1744 | - added central device enable/disable support\r |
| 1745 | - modified SAVE/GET to save and restore flags\r |
| 1746 | - modified boot routine calling sequence\r |
| 1747 | scp_tty.c:\r |
| 1748 | - removed VT emulation support\r |
| 1749 | - added sim_os_sleep, renamed sim_poll_kbd, sim_putchar\r |
| 1750 | sim_tmxr.c:\r |
| 1751 | - modified for Telnet console support\r |
| 1752 | - fixed bug in binary (8b) support\r |
| 1753 | sim_sock.c: modified for Telnet console support\r |
| 1754 | sim_ether.c: new library for Ethernet (from David Hittner)\r |
| 1755 | \r |
| 1756 | all magtapes:\r |
| 1757 | - added support for end of medium\r |
| 1758 | - cleaned up BOT handling\r |
| 1759 | \r |
| 1760 | all DECtapes: added support for RT11 image file format\r |
| 1761 | \r |
| 1762 | most terminals and multiplexors:\r |
| 1763 | - added support for 7b vs 8b character processing\r |
| 1764 | \r |
| 1765 | PDP-1\r |
| 1766 | pdp1_cpu.c, pdp1_sys.c, pdp1_dt.c: added PDP-1 DECtape support\r |
| 1767 | \r |
| 1768 | PDP-8\r |
| 1769 | pdp8_cpu.c, all peripherals:\r |
| 1770 | - added variable device number support\r |
| 1771 | - added new device enabled/disable support\r |
| 1772 | pdp8_rx.c: added RX28/RX02 support\r |
| 1773 | \r |
| 1774 | PDP-11\r |
| 1775 | pdp11_defs.h, pdp11_io.c, pdp11_sys.c, all peripherals:\r |
| 1776 | - added variable vector support\r |
| 1777 | - added new device enable/disable support\r |
| 1778 | - added autoconfiguration support\r |
| 1779 | all bootstraps: modified to support variable addresses\r |
| 1780 | dec_mscp.h, pdp11_tq.c: added TK50 support\r |
| 1781 | pdp11_rq.c:\r |
| 1782 | - added multicontroller support\r |
| 1783 | - fixed bug in HBE error log packet\r |
| 1784 | - fixed bug in ATP processing\r |
| 1785 | pdp11_ry.c: added RX211/RX02 support\r |
| 1786 | pdp11_hk.c: added RK611/RK06/RK07 support\r |
| 1787 | pdp11_tq.c: added TMSCP support\r |
| 1788 | pdp11_xq.c: added DEQNA/DELQA support (from David Hittner)\r |
| 1789 | pdp11_pclk.c: added KW11P support\r |
| 1790 | pdp11_ts.c:\r |
| 1791 | - fixed bug in CTL decoding\r |
| 1792 | - fixed bug in extended status XS0_MOT\r |
| 1793 | pdp11_stddev.c: removed paper tape to its own module\r |
| 1794 | \r |
| 1795 | PDP-18b\r |
| 1796 | pdp18b_cpu.c, all peripherals:\r |
| 1797 | - added variable device number support\r |
| 1798 | - added new device enabled/disabled support\r |
| 1799 | \r |
| 1800 | VAX\r |
| 1801 | dec_dz.h: fixed bug in number of boards calculation\r |
| 1802 | vax_moddefs.h, vax_io.c, vax_sys.c, all peripherals:\r |
| 1803 | - added variable vector support\r |
| 1804 | - added new device enable/disable support\r |
| 1805 | - added autoconfiguration support\r |
| 1806 | vax_sys.c:\r |
| 1807 | - generalized examine/deposit\r |
| 1808 | - added TMSCP, multiple RQDX3, DEQNA/DELQA support\r |
| 1809 | vax_stddev.c: removed paper tape, now uses PDP-11 version\r |
| 1810 | vax_sysdev.c:\r |
| 1811 | - allowed NVR to be attached to file\r |
| 1812 | - removed unused variables (found by David Hittner)\r |
| 1813 | \r |
| 1814 | PDP-10\r |
| 1815 | pdp10_defs.h, pdp10_ksio.c, all peripherals:\r |
| 1816 | - added variable vector support\r |
| 1817 | - added new device enable/disable support\r |
| 1818 | pdp10_defs.h, pdp10_ksio.c: added support for standard PDP-11\r |
| 1819 | peripherals, added RX211 support\r |
| 1820 | pdp10_pt.c: rewritten to reference common implementation\r |
| 1821 | \r |
| 1822 | Nova, Eclipse:\r |
| 1823 | nova_cpu.c, eclipse_cpu.c, all peripherals:\r |
| 1824 | - added new device enable/disable support\r |
| 1825 | \r |
| 1826 | HP2100\r |
| 1827 | hp2100_cpu:\r |
| 1828 | - fixed bugs in the EAU, 21MX, DMS, and IOP instructions\r |
| 1829 | - fixed bugs in the memory protect and DMS functions\r |
| 1830 | - created new options to enable/disable EAU, MPR, DMS\r |
| 1831 | - added new device enable/disable support\r |
| 1832 | hp2100_fp.c:\r |
| 1833 | - recoded to conform to 21MX microcode algorithms\r |
| 1834 | hp2100_stddev.c:\r |
| 1835 | - fixed bugs in TTY reset, OTA, time base generator\r |
| 1836 | - revised BOOT support to conform to RBL loader\r |
| 1837 | - added clock calibration\r |
| 1838 | hp2100_dp.c:\r |
| 1839 | - changed default to 13210A\r |
| 1840 | - added BOOT support\r |
| 1841 | hp2100_dq.c:\r |
| 1842 | - finished incomplete functions, fixed head switching\r |
| 1843 | - added BOOT support\r |
| 1844 | hp2100_ms.c:\r |
| 1845 | - fixed bugs found by diagnostics\r |
| 1846 | - added 13183 support\r |
| 1847 | - added BOOT support\r |
| 1848 | hp2100_mt.c:\r |
| 1849 | - fixed bugs found by diagnostics\r |
| 1850 | - disabled by default\r |
| 1851 | hp2100_lpt.c: implemented 12845A controller\r |
| 1852 | hp2100_lps.c:\r |
| 1853 | - renamed 12653A controller\r |
| 1854 | - added diagnostic mode for MPR, DCPC diagnostics\r |
| 1855 | - disabled by default\r |
| 1856 | \r |
| 1857 | IBM 1620: first release\r |
| 1858 | \r |
| 1859 | /* V2.9 revision history\r |
| 1860 | \r |
| 1861 | 11 20-Jul-02 i1401_mt.c: on read, end of record stores group mark\r |
| 1862 | without word mark (found by Van Snyder)\r |
| 1863 | \r |
| 1864 | i1401_dp.c: reworked address generation and checking\r |
| 1865 | \r |
| 1866 | vax_cpu.c: added infinite loop detection and halt to\r |
| 1867 | boot ROM option (from Mark Pizzolato)\r |
| 1868 | \r |
| 1869 | vax_fpa.c: changed function names to prevent conflict\r |
| 1870 | with C math library\r |
| 1871 | \r |
| 1872 | pdp11_cpu.c: fixed bug in MMR0 update logic (from\r |
| 1873 | John Dundas)\r |
| 1874 | \r |
| 1875 | pdp18b_stddev.c: added "ASCII mode" for reader and\r |
| 1876 | punch (from Hans Pufal)\r |
| 1877 | \r |
| 1878 | gri_*.c: added GRI-909 simulator\r |
| 1879 | \r |
| 1880 | scp.c: added DO echo, DO exit (from Brian Knittel)\r |
| 1881 | \r |
| 1882 | scp_tty.c: added Windows priority hacking (from\r |
| 1883 | Mark Pizzolato)\r |
| 1884 | \r |
| 1885 | 10 15-Jun-02 scp.c: fixed error checking on calls to fxread/fxwrite\r |
| 1886 | (found by Norm Lastovic)\r |
| 1887 | \r |
| 1888 | scp_tty.c, sim_vt.h, sim_vt.c: added VTxxx emulation\r |
| 1889 | support for Windows (from Fischer Franz)\r |
| 1890 | \r |
| 1891 | sim_sock.c: added OS/2 support (from Holger Veit)\r |
| 1892 | \r |
| 1893 | pdp11_cpu.c: fixed bugs (from John Dundas)\r |
| 1894 | - added special case for PS<15:12> = 1111 to MFPI\r |
| 1895 | - removed special case from MTPI\r |
| 1896 | - added masking of relocation adds \r |
| 1897 | \r |
| 1898 | i1401_cpu.c:\r |
| 1899 | - added multiply/divide\r |
| 1900 | - fixed bugs (found by Van Snyder)\r |
| 1901 | o 5 and 7 character H, 7 character doesn't branch\r |
| 1902 | o 8 character NOP\r |
| 1903 | o 1401-like memory dump\r |
| 1904 | \r |
| 1905 | i1401_dp.c: added 1311 disk\r |
| 1906 | \r |
| 1907 | 9 04-May-02 pdp11_rq: fixed bug in polling routine\r |
| 1908 | \r |
| 1909 | 8 03-May-02 scp.c:\r |
| 1910 | - changed LOG/NOLOG to SET LOG/NOLOG\r |
| 1911 | - added SHOW LOG\r |
| 1912 | - added SET VT/NOVT and SHOW VT for VT emulation\r |
| 1913 | \r |
| 1914 | sim_sock.h: changed VMS stropt.h include to ioctl.h\r |
| 1915 | \r |
| 1916 | vax_cpu.c\r |
| 1917 | - added TODR powerup routine to set date, time on boot\r |
| 1918 | - fixed exception flows to clear trap request\r |
| 1919 | - fixed register logging in autoincrement indexed\r |
| 1920 | \r |
| 1921 | vax_stddev.c: added TODR powerup routine\r |
| 1922 | \r |
| 1923 | vax_cpu1.c: fixed exception flows to clear trap request\r |
| 1924 | \r |
| 1925 | 7 30-Apr-02 scp.c: fixed bug in clock calibration when (real) clock\r |
| 1926 | jumps forward due too far (found by Jonathan Engdahl)\r |
| 1927 | \r |
| 1928 | pdp11_cpu.c: fixed bugs, added features (from John Dundas\r |
| 1929 | and Wolfgang Helbig)\r |
| 1930 | - added HTRAP and BPOK to maintenance register\r |
| 1931 | - added trap on kernel HALT if MAINT<HTRAP> set\r |
| 1932 | - fixed red zone trap, clear odd address and nxm traps\r |
| 1933 | - fixed RTS SP, don't increment restored SP\r |
| 1934 | - fixed TSTSET, write dst | 1 rather than prev R0 | 1\r |
| 1935 | - fixed DIV, set N=0,Z=1 on div by zero (J11, 11/70)\r |
| 1936 | - fixed DIV, set set N=Z=0 on overfow (J11, 11/70)\r |
| 1937 | - fixed ASH, ASHC, count = -32 used implementation-\r |
| 1938 | dependent 32 bit right shift\r |
| 1939 | - fixed illegal instruction test to detect 000010\r |
| 1940 | - fixed write-only page test\r |
| 1941 | \r |
| 1942 | pdp11_rp.c: fixed SHOW ADDRESS command\r |
| 1943 | \r |
| 1944 | vaxmod_defs.h: fixed DZ vector base and number of lines\r |
| 1945 | \r |
| 1946 | dec_dz.h:\r |
| 1947 | - fixed interrupt acknowledge routines\r |
| 1948 | - fixed SHOW ADDRESS command\r |
| 1949 | \r |
| 1950 | all magtape routines: added test for badly formed\r |
| 1951 | record length (suggested by Jonathan Engdahl)\r |
| 1952 | \r |
| 1953 | 6 18-Apr-02 vax_cpu.c: fixed CASEL condition codes\r |
| 1954 | \r |
| 1955 | vax_cpu1.c: fixed vfield pos > 31 test to be unsigned\r |
| 1956 | \r |
| 1957 | vax_fpu.c: fixed EDIV overflow test for 0 quotient\r |
| 1958 | \r |
| 1959 | 5 14-Apr-02 vax_cpu1.c:\r |
| 1960 | - fixed interrupt, prv_mode set to 0 (found by Tim Stark)\r |
| 1961 | - fixed PROBEx to mask mode to 2b (found by Kevin Handy)\r |
| 1962 | \r |
| 1963 | 4 1-Apr-02 pdp11_rq.c: fixed bug, reset cleared write protect status\r |
| 1964 | \r |
| 1965 | pdp11_ts.c: fixed bug in residual frame count after space\r |
| 1966 | \r |
| 1967 | 3 15-Mar-02 pdp11_defs.h: changed default model to KDJ11A (11/73)\r |
| 1968 | \r |
| 1969 | pdp11_rq.c: adjusted delays for M+ timing bugs\r |
| 1970 | \r |
| 1971 | hp2100_cpu.c, pdp10_cpu.c, pdp11_cpu.c: tweaked abort\r |
| 1972 | code for ANSI setjmp/longjmp compliance\r |
| 1973 | \r |
| 1974 | hp2100_cpu.c, hp2100_fp.c, hp2100_stddev.c, hp2100_sys.c:\r |
| 1975 | revised to allocate memory dynamically\r |
| 1976 | \r |
| 1977 | 2 01-Mar-02 pdp11_cpu.c:\r |
| 1978 | - fixed bugs in CPU registers\r |
| 1979 | - fixed double operand evaluation order for M+\r |
| 1980 | \r |
| 1981 | pdp11_rq.c: added delays to initialization for\r |
| 1982 | RSX11M+ prior to V4.5\r |
| 1983 | \r |
| 1984 | 1 20-Feb-02 scp.c: fixed bug in clock calibration when (real)\r |
| 1985 | time runs backwards\r |
| 1986 | \r |
| 1987 | pdp11_rq.c: fixed bug in host timeout logic\r |
| 1988 | \r |
| 1989 | pdp11_ts.c: fixed bug in message header logic\r |
| 1990 | \r |
| 1991 | pdp18b_defs.h, pdp18b_dt.c, pdp18b_sys.c: added\r |
| 1992 | PDP-7 DECtape support\r |
| 1993 | \r |
| 1994 | hp2100_cpu.c:\r |
| 1995 | - added floating point and DMS\r |
| 1996 | - fixed bugs in DIV, ASL, ASR, LBT, SBT, CBT, CMW\r |
| 1997 | \r |
| 1998 | hp2100_sys.c: added floating point, DMS\r |
| 1999 | \r |
| 2000 | hp2100_fp.c: added floating point\r |
| 2001 | \r |
| 2002 | ibm1130: added Brian Knittel's IBM 1130 simulator\r |
| 2003 | \r |
| 2004 | 0 30-Jan-02 scp.c:\r |
| 2005 | - generalized timer package for multiple timers\r |
| 2006 | - added circular register arrays\r |
| 2007 | - fixed bugs, line spacing in modifier display\r |
| 2008 | - added -e switch to attach\r |
| 2009 | - moved device enable/disable to simulators\r |
| 2010 | \r |
| 2011 | scp_tty.c: VAX specific fix (from Robert Alan Byer)\r |
| 2012 | \r |
| 2013 | sim_tmxr.c, sim_tmxr.h:\r |
| 2014 | - added tmxr_fstats, tmxr_dscln\r |
| 2015 | - renamed tmxr_fstatus to tmxr_fconns\r |
| 2016 | \r |
| 2017 | sim_sock.c, sim_sock.h: added VMS support (from\r |
| 2018 | Robert Alan Byer)\r |
| 2019 | \r |
| 2020 | pdp_dz.h, pdp18b_tt1.c, nova_tt1.c:\r |
| 2021 | - added SET DISCONNECT\r |
| 2022 | - added SHOW STATISTICS\r |
| 2023 | \r |
| 2024 | pdp8_defs.h: fixed bug in interrupt enable initialization\r |
| 2025 | \r |
| 2026 | pdp8_ttx.c: rewrote as unified multiplexor\r |
| 2027 | \r |
| 2028 | pdp11_cpu.c: fixed calc_MMR1 macro (found by Robert Alan Byer)\r |
| 2029 | \r |
| 2030 | pdp11_stddev.c: fixed bugs in KW11L (found by John Dundas)\r |
| 2031 | \r |
| 2032 | pdp11_rp.c: fixed bug in 18b mode boot\r |
| 2033 | \r |
| 2034 | pdp11 bootable I/O devices: fixed register setup at boot\r |
| 2035 | exit (found by Doug Carman)\r |
| 2036 | \r |
| 2037 | hp2100_cpu.c:\r |
| 2038 | - fixed DMA register tables (found by Bill McDermith)\r |
| 2039 | - fixed SZx,SLx,RSS bug (found by Bill McDermith)\r |
| 2040 | - fixed flop restore logic (found by Bill McDermith)\r |
| 2041 | \r |
| 2042 | hp2100_mt.c: fixed bug on write of last character\r |
| 2043 | \r |
| 2044 | hp2100_dq,dr,ms,mux.c: added new disk, magtape, and terminal\r |
| 2045 | multiplexor controllers\r |
| 2046 | \r |
| 2047 | i1401_cd.c, i1401_mt.c: new zero footprint bootstraps\r |
| 2048 | (from Van Snyder)\r |
| 2049 | \r |
| 2050 | i1401_sys.c: fixed symbolic display of H, NOP with no trailing\r |
| 2051 | word mark (found by Van Snyder)\r |
| 2052 | \r |
| 2053 | most CPUs:\r |
| 2054 | - replaced OLDPC with PC queue\r |
| 2055 | - implemented device enable/disable locally\r |
| 2056 | \r |
| 2057 | V2.8 revision history\r |
| 2058 | \r |
| 2059 | 5 25-Dec-01 scp.c: fixed bug in DO command (found by John Dundas)\r |
| 2060 | \r |
| 2061 | pdp10_cpu.c:\r |
| 2062 | - moved trap-in-progress to separate variable\r |
| 2063 | - cleaned up declarations\r |
| 2064 | - cleaned up volatile state for GNU C longjmp\r |
| 2065 | \r |
| 2066 | pdp11_cpu.c: cleaned up declarations\r |
| 2067 | \r |
| 2068 | pdp11_rq.c: added RA-class disks\r |
| 2069 | \r |
| 2070 | 4 17-Dec-01 pdp11_rq.c: added delayed processing of packets\r |
| 2071 | \r |
| 2072 | 3 16-Dec-01 pdp8_cpu.c:\r |
| 2073 | - mode A EAE instructions didn't clear GTF\r |
| 2074 | - ASR shift count > 24 mis-set GTF\r |
| 2075 | - effective shift count == 32 didn't work\r |
| 2076 | \r |
| 2077 | 2 07-Dec-01 scp.c: added breakpoint package\r |
| 2078 | \r |
| 2079 | all CPU's: revised to use new breakpoint package\r |
| 2080 | \r |
| 2081 | 1 05-Dec-01 scp.c: fixed bug in universal register name logic\r |
| 2082 | \r |
| 2083 | 0 30-Nov-01 Reorganized simh source and documentation tree\r |
| 2084 | \r |
| 2085 | scp: Added DO command, universal registers, extended\r |
| 2086 | SET/SHOW logic\r |
| 2087 | \r |
| 2088 | pdp11: overhauled PDP-11 for DMA map support, shared\r |
| 2089 | sources with VAX, dynamic buffer allocation\r |
| 2090 | \r |
| 2091 | 18b pdp: overhauled interrupt structure\r |
| 2092 | \r |
| 2093 | pdp8: added RL8A\r |
| 2094 | \r |
| 2095 | pdp10: fixed two ITS-related bugs (found by Dave Conroy)\r |
| 2096 | \r |
| 2097 | V2.7 revision history\r |
| 2098 | \r |
| 2099 | patch date module(s) and fix(es)\r |
| 2100 | \r |
| 2101 | 15 23-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: fixed bugs\r |
| 2102 | error interrupt handling\r |
| 2103 | \r |
| 2104 | pdp10_defs.h, pdp10_ksio.c, pdp10_fe.c, pdp10_fe.c,\r |
| 2105 | pdp10_rp.c, pdp10_tu.c: reworked I/O page interface\r |
| 2106 | to use symbolic base addresses and lengths\r |
| 2107 | \r |
| 2108 | 14 20-Oct-01 dec_dz.h, sim_tmxr_h, sim_tmxr.c: fixed bug in Telnet\r |
| 2109 | state handling (found by Thord Nilson), removed\r |
| 2110 | tmxr_getchar, added tmxr_rqln and tmxr_tqln\r |
| 2111 | \r |
| 2112 | 13 18-Oct-01 pdp11_tm.c: added stub diagnostic register clock\r |
| 2113 | for RSTS/E (found by Thord Nilson)\r |
| 2114 | \r |
| 2115 | 12 15-Oct-01 pdp11_defs.h, pdp11_cpu.c, pdp11_tc.c, pdp11_ts.c,\r |
| 2116 | pdp11_rp.c: added operations logging\r |
| 2117 | \r |
| 2118 | 11 8-Oct-01 scp.c: added sim_rev.h include and version print\r |
| 2119 | \r |
| 2120 | pdp11_cpu.c: fixed bug in interrupt acknowledge,\r |
| 2121 | multiple outstanding interrupts caused the lowest\r |
| 2122 | rather than the highest to be acknowledged\r |
| 2123 | \r |
| 2124 | 10 7-Oct-01 pdp11_stddev.c: added monitor bits (CSR<7>) for full\r |
| 2125 | KW11L compatibility, needed for RSTS/E autoconfiguration\r |
| 2126 | \r |
| 2127 | 9 6-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: rewrote interrupt\r |
| 2128 | logic from RH11/RH70 schematics, to mimic hardware quirks\r |
| 2129 | \r |
| 2130 | dec_dz.c: fixed bug in carrier detect logic, carrier\r |
| 2131 | detect was being cleared on next modem poll\r |
| 2132 | \r |
| 2133 | 8 4-Oct-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: undid edit of\r |
| 2134 | 28-Sep-01; real problem was level-sensitive nature of\r |
| 2135 | CS1_SC, but CS1_SC can only trigger an interrupt if\r |
| 2136 | DONE is set\r |
| 2137 | \r |
| 2138 | 7 2-Oct-01 pdp11_rp.c, pdp10_rp.c: CS1_SC is evaluated as a level-\r |
| 2139 | sensitive, rather than an edge-sensitive, input to\r |
| 2140 | interrupt request\r |
| 2141 | \r |
| 2142 | 6 30-Sep-01 pdp11_rp.c, pdp10_rp.c: separated out CS1<5:0> to per-\r |
| 2143 | drive registers\r |
| 2144 | \r |
| 2145 | pdp10_tu.c: based on above, cleaned up handling of\r |
| 2146 | non-existent formatters, fixed non-data transfer\r |
| 2147 | commands clearing DONE\r |
| 2148 | \r |
| 2149 | 5 28-Sep-01 pdp11_rp.c, pdp10_rp.c, pdp10_tu.c: controller should\r |
| 2150 | interrupt if ATA or SC sets when IE is set, was\r |
| 2151 | interrupting only if DON = 1 as well\r |
| 2152 | \r |
| 2153 | 4 27-Sep-01 pdp11_ts.c:\r |
| 2154 | - NXM errors should return TC4 or TC5; were returning TC3\r |
| 2155 | - extended features is part of XS2; was returned in XS3\r |
| 2156 | - extended characteristics (fifth) word needed for RSTS/E\r |
| 2157 | \r |
| 2158 | pdp11_tc.c: stop, stop all do cause an interrupt\r |
| 2159 | \r |
| 2160 | dec_dz.h: scanner should find a ready output line, even\r |
| 2161 | if there are no connections; needed for RSTS/E autoconfigure\r |
| 2162 | \r |
| 2163 | scp.c:\r |
| 2164 | - added routine sim_qcount for 1130\r |
| 2165 | - added "simulator exit" detach routine for 1130\r |
| 2166 | \r |
| 2167 | sim_defs.h: added header for sim_qcount\r |
| 2168 | \r |
| 2169 | 3 20-Sep-01 pdp11_ts.c: boot code binary was incorrect\r |
| 2170 | \r |
| 2171 | 2 19-Sep-01 pdp18b_cpu.c: EAE should interpret initial count of 00\r |
| 2172 | as 100\r |
| 2173 | \r |
| 2174 | scp.c: modified Macintosh support\r |
| 2175 | \r |
| 2176 | 1 17-Sep-01 pdp8_ttx.c: new module for PDP-8 multi-terminal support\r |
| 2177 | \r |
| 2178 | pdp18b_tt1.c: modified to use sim_tmxr library\r |
| 2179 | \r |
| 2180 | nova_tt1.c: modified to use sim_tmxr library\r |
| 2181 | \r |
| 2182 | dec_dz.h: added autodisconnect support\r |
| 2183 | \r |
| 2184 | scp.c: removed old multiconsole support\r |
| 2185 | \r |
| 2186 | sim_tmxr.c: modified calling sequence for sim_putchar_ln\r |
| 2187 | \r |
| 2188 | sim_sock.c: added Macintosh sockets support\r |
| 2189 | */\r |
| 2190 | \r |
| 2191 | #endif\r |