First Commit of my working state

[simh.git] / NOVA / nova_lp.c

/* nova_lp.c: NOVA line printer simulator\r
\r
   Copyright (c) 1993-2008, Robert M. Supnik\r
\r
   Permission is hereby granted, free of charge, to any person obtaining a\r
   copy of this software and associated documentation files (the "Software"),\r
   to deal in the Software without restriction, including without limitation\r
   the rights to use, copy, modify, merge, publish, distribute, sublicense,\r
   and/or sell copies of the Software, and to permit persons to whom the\r
   Software is furnished to do so, subject to the following conditions:\r
\r
   The above copyright notice and this permission notice shall be included in\r
   all copies or substantial portions of the Software.\r
\r
   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\r
   IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\r
   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL\r
   ROBERT M SUPNIK BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER\r
   IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN\r
   CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r
\r
   Except as contained in this notice, the name of Robert M Supnik shall not be\r
   used in advertising or otherwise to promote the sale, use or other dealings\r
   in this Software without prior written authorization from Robert M Supnik.\r
\r
   lpt          line printer\r
\r
   04-Jul-07    BKR     DEV_SET/CLR macros now used,\r
                        <FF>, <CR>, <LF> output character delay now contingent upon non-zero TIME value,\r
                        LPT can now be DISABLED\r
   19-Jan-07    RMS     Added UNIT_TEXT\r
   25-Apr-03    RMS     Revised for extended file support\r
   30-May-02    RMS     Widened POS to 32b\r
\r
\r
Notes:\r
    - data currently masked to 7 bits.\r
    - if register TIME is non-zero, then delay TIME events if <FF>, <CR> or <LF> seen\r
    - register POS show the current file position\r
    - register STOP_IOE determines return value issued if output to unattached LPT is attempted\r
*/\r
\r
#include "nova_defs.h"\r
\r
extern int32 int_req, dev_busy, dev_done, dev_disable;\r
\r
\r
int32 lpt_stopioe = 0;                                  /* stop on error flag */\r
\r
int32 lpt (int32 pulse, int32 code, int32 AC);\r
t_stat lpt_svc (UNIT *uptr);\r
t_stat lpt_reset (DEVICE *dptr);\r
\r
/* LPT data structures\r
\r
   lpt_dev      LPT device descriptor\r
   lpt_unit     LPT unit descriptor\r
   lpt_reg      LPT register list\r
*/\r
\r
DIB lpt_dib = { DEV_LPT, INT_LPT, PI_LPT, &lpt };\r
\r
UNIT lpt_unit = {    /* 2007-May-30, bkr */\r
    UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_TEXT, 0), SERIAL_OUT_WAIT\r
    };\r
\r
REG lpt_reg[] = {\r
    { ORDATA (BUF, lpt_unit.buf, 8) },\r
    { FLDATA (BUSY, dev_busy, INT_V_LPT) },\r
    { FLDATA (DONE, dev_done, INT_V_LPT) },\r
    { FLDATA (DISABLE, dev_disable, INT_V_LPT) },\r
    { FLDATA (INT, int_req, INT_V_LPT) },\r
    { DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },\r
    { DRDATA (TIME, lpt_unit.wait, 24), PV_LEFT },\r
    { FLDATA (STOP_IOE, lpt_stopioe, 0) },\r
    { NULL }\r
    };\r
\r
DEVICE lpt_dev = {\r
    "LPT", &lpt_unit, lpt_reg, NULL,\r
    1, 10, 31, 1, 8, 8,\r
    NULL, NULL, &lpt_reset,\r
    NULL, NULL, NULL,\r
    &lpt_dib, DEV_DISABLE\r
    };\r
\r
\r
/* IOT routine */\r
\r
int32 lpt (int32 pulse, int32 code, int32 AC)\r
{\r
if (code == ioDOA)\r
    lpt_unit.buf = AC & 0177 ;\r
\r
switch (pulse)\r
    {                                                   /* decode IR<8:9> */\r
  case iopS:                                            /* start */\r
    DEV_SET_BUSY( INT_LPT ) ;\r
    DEV_CLR_DONE( INT_LPT ) ;\r
    DEV_UPDATE_INTR ;\r
    if ( lpt_unit.wait )\r
       if (  (lpt_unit.buf == 015)\r
          || (lpt_unit.buf == 014)\r
          || (lpt_unit.buf == 012)\r
          )\r
        {\r
        sim_activate (&lpt_unit, lpt_unit.wait);\r
        break ;\r
        }\r
    return (lpt_svc (&lpt_unit) << IOT_V_REASON);\r
    break;\r
\r
  case iopC:                                            /* clear */\r
    DEV_CLR_BUSY( INT_LPT ) ;\r
    DEV_CLR_DONE( INT_LPT ) ;\r
    DEV_UPDATE_INTR ;\r
    sim_cancel (&lpt_unit);                             /* deactivate unit */\r
    break;\r
    }                                                   /* end switch */\r
\r
return 0;\r
}\r
\r
\r
/* Unit service */\r
\r
t_stat lpt_svc (UNIT *uptr)\r
{\r
DEV_CLR_BUSY( INT_LPT ) ;\r
DEV_SET_DONE( INT_LPT ) ;\r
DEV_UPDATE_INTR ;\r
if ((lpt_unit.flags & UNIT_ATT) == 0)                   /* attached? */\r
    return IORETURN (lpt_stopioe, SCPE_UNATT);\r
fputc (uptr->buf, uptr->fileref);\r
uptr->pos = ftell (uptr->fileref);\r
if (ferror (uptr->fileref)) {\r
    perror ("LPT I/O error");\r
    clearerr (uptr->fileref);\r
    return SCPE_IOERR;\r
    }\r
return SCPE_OK;\r
}\r
\r
\r
/* Reset routine */\r
\r
t_stat lpt_reset (DEVICE *dptr)\r
{\r
lpt_unit.buf = 0;                                       /* (not DG compatible) */\r
DEV_CLR_BUSY( INT_LPT ) ;\r
DEV_CLR_DONE( INT_LPT ) ;\r
DEV_UPDATE_INTR ;\r
sim_cancel (&lpt_unit);                                 /* deactivate unit */\r
return SCPE_OK;\r
}\r